UNSTEADY ANALYSIS OF HEAT TRANSFER COEFFICIENT DISTRIBUTION IN A STATIC RIBBED CHANNEL FOR AN ESTABLISHED FLOW

被引:0
|
作者
Perrot, Aurelien [1 ]
Gicquel, Laurent [1 ]
Duchaine, Florent [1 ]
Odier, Nicolas [1 ]
Dombard, Jerome [1 ]
Grosnickel, Thomas [2 ]
机构
[1] CERFACS, CFD Team, 42 Ave Gaspard Coriolis, F-31057 Toulouse, France
[2] Safran Helicopter Engine, Ave J Slydowsky, F-64511 Bordes, France
关键词
BOUNDARY-CONDITIONS; EDDY SIMULATION; FRICTION; SQUARE;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Turbulent ribbed channels are extensively used in turbomachinery to enhance convective heat transfer in internally-cooled components like turbine blades. One of the key aspect of such a problem is the distribution of the Heat Transfer Coefficient (HTC) in fully developed flows and many studies have addressed this problem by use of Computational Fluid Dynamics (CFD). In the present document, Large Eddy Simulation (LES) is performed for a configuration from a test-rig at the Von Karman Institute representing a square channel with periodic square ribs. The whole channel is computed in an attempt to better understand HTC maps in this specific configuration. Resulting mean and unsteady flow features are captured and predictions are used to further explain the obtained HTC distribution. More specifically turbulent structures are seen to bring cold gas from the main flow to the wall. A statistical analysis of these events using the joint velocity-temperature PDF and quadrant method allows to define 4 types of events happening at every location of the channel and which can then be linked to the HTC distribution. First the HTC is very high where the flow impacts the wall with cold temperature whereas it is lower where the hot gas is ejected to the main flow. In an attempt to link the HTC trace on the channel wall with structures in the flow field far-off the wall, the main modes are identified performing Power Spectral Density (PSD) analysis of the velocity along the channel. Dynamic Mode Decomposition (DMD) of the flow field data is then used to present the spatio-temporal characteristics of two of the identified most dominant modes : a vortex-street mode linked to the first rib and a rib-to-rib mode appearing because of the quasi-periodicity of the configuration. However DMD analysis of the HTC trace on the wall does not emphasize any dominant mode. This indicates a weak link between the main flow large scale features and the instantaneous and more local HTC distribution.
引用
收藏
页数:13
相关论文
共 50 条
  • [41] SECONDARY FLOW AND HEAT TRANSFER COEFFICIENT DISTRIBUTIONS IN THE DEVELOPING FLOW REGION OF RIBBED TURBINE BLADE COOLING PASSAGES
    Forsyth, Peter R.
    McGilvray, Matthew
    Gillespie, David R. H.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 5A, 2014,
  • [42] FLOW CHARACTERISTICS AND HEAT TRANSFER PERFORMANCE OF UNSTEADY TURBULENT FLOW IN A CHANNEL WITH CASCADE PROMOTERS
    Hijikata, K.
    Ishiguro, H.
    Odai, Y.
    Ishitoya, K.
    EXPERIMENTAL HEAT TRANSFER, 1987, 1 (01) : 57 - 69
  • [43] DISTRIBUTION OF THE HEAT-TRANSFER COEFFICIENT IN A CHANNEL WITH PERIODIC TRANSVERSE GROOVES
    LORENZ, S
    MUKOMILOW, D
    LEINER, W
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1995, 11 (03) : 234 - 242
  • [44] Effects of Channel Rotation and Bleed Flow on Heat/Mass Transfer Characteristics in a 90 degrees Ribbed Square Channel
    Park, Suk Hwan
    Jeon, Yun Heung
    Kim, Kyung Min
    Lee, Dong Hyun
    Cho, Hyung Hee
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2007, 31 (01) : 83 - 90
  • [45] Flow and heat transfer analysis in a deformable channel
    Asghar S.
    Abbas Z.
    Mushtaq M.
    Hayat T.
    Journal of Engineering Physics and Thermophysics, 2016, 89 (4) : 929 - 941
  • [46] Two-Dimensional Heat Transfer Distribution of a Rotating Ribbed Channel at Different Reynolds Numbers
    Mayo, Ignacio
    Arts, Tony
    El-Habib, Ahmed
    Parres, Benjamin
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2015, 137 (03):
  • [47] Unsteady Oscillatory Flow and Heat Transfer in a Horizontal Composite Porous Medium Channel
    Umavathi, J. C.
    Chamkha, A. J.
    Mateen, A.
    Al-Mudhaf, A.
    NONLINEAR ANALYSIS-MODELLING AND CONTROL, 2009, 14 (03): : 397 - 415
  • [49] Unsteady flow and heat transfer in a channel with a built-in tandem of rectangular cylinders
    Valencia, A
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 1996, 29 (06) : 613 - 623
  • [50] INFLUENCE OF HEAT LEAKAGE ON ACCURACY OF UNSTEADY HEAT TRANSFER COEFFICIENT DETERMINATION IN TURBINE FLOW PASSAGE.
    Zakirov, M.U.
    Zhuikov, V.V.
    Panteleev, A.A.
    Trushin, V.A.
    Soviet Aeronautics (English translation of Izvestiya VUZ, Aviatsionnaya Tekhnika), 1975, 18 (03): : 114 - 118