Effects of surface finishes, heat treatments and printing orientations on stress corrosion cracking behavior of laser powder bed fusion 316L stainless steel in high-temperature water

被引：4

作者：

Que, Zaiqing ^{[1
]}

Riipinen, Tuomas ^{[2
]}

Ferreiros, Pedro ^{[1
]}

Goel, Sneha ^{[1
]}

Sipila, Konsta ^{[1
]}

Saario, Timo ^{[1
]}

Ikalainen, Tiina ^{[1
]}

Toivonen, Aki ^{[1
]}

Revuelta, Alejandro ^{[2
]}

机构：

[1] VTT Tech Res Ctr Finland, Adv Mat Nucl Energy, Kivimiehentie 3, Espoo 02150, Finland

[2] VTT Tech Res Ctr Finland, Adv Mfg Technol, Kemistintie 3, Espoo 02150, Finland

来源：

CORROSION SCIENCE | 2024年 / 233卷

关键词：

Laser powder bed fusion; Stress corrosion cracking; Surface treatment; Stainless steel; High-temperature water; Heat treatment; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; GROWTH BEHAVIOR; MICROSTRUCTURE; ENHANCEMENT; RESISTANCE;

D O I：

10.1016/j.corsci.2024.112118

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Stress corrosion cracking (SCC) of laser powder bed fusion 316 L stainless steel in oxygenated high-temperature water environments with chloride addition at 288 degrees C was studied. The influences of surface finishes (as-built, mechanically polished, Hirtisation (R) and shot peened), heat treatments (solution annealing at 1066 and 1150 degrees C and hot isostatic pressing) and the printing orientations on SCC were evaluated. Hirtisation resulted in a lower SCC susceptibility than as-built or polished surface while shot peening showed the lowest apparent SCC resistance. A high annealing temperature decreases SCC resistance. The effect of printing orientation is material and environment dependent.

引用

页数：16

共 50 条

[31] Numerical model of heat transfer during laser powder bed fusion of 316L stainless steel
Cox, Bryce
Ghayoor, Milad
Doyle, Ryan P.
Pasebani, Somayeh
Gess, Joshua
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (9-10): : 5715 - 5725
[32] Stress corrosion cracking of cold worked 316L stainless steel in high temperature and high pressure pure water
Du, Dong-Hai
Shen, Zhao
Chen, Kai
Yu, Lun
Zhang, Le-Fu
Shi, Xiu-Qiang
Xu, Xue-Lian
Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 (02): : 196 - 203
[33] Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion
Calderon, L. A. Avila
Rehmer, B.
Schriever, S.
Ulbricht, A.
Jacome, L. Agudo
Sommer, K.
Mohr, G.
Skrotzki, B.
Evans, A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 830
[34] Simulation of 316L Stainless Steel Produced the Laser Powder Bed Fusion Process
Kascak, Lubos
Varga, Jan
Bidulska, Jana
Bidulsky, Robert
MATERIALS, 2023, 16 (24)
[35] Microstructural and Nanoindentation Investigation on the Laser Powder Bed Fusion Stainless Steel 316L
Kurdi, Abdulaziz
Tabbakh, Thamer
Basak, Animesh Kumar
MATERIALS, 2023, 16 (17)
[36] Mechanical and Microstructural Anisotropy of Laser Powder Bed Fusion 316L Stainless Steel
Pitrmuc, Zdenek
Simota, Jan
Beranek, Libor
Mikes, Petr
Andronov, Vladislav
Sommer, Jiri
Holesovsky, Frantisek
MATERIALS, 2022, 15 (02)
[37] Development of crystallographic misorientation in laser powder bed fusion 316L stainless steel
Biswas, Prosenjit
Ma, Ji
ADDITIVE MANUFACTURING, 2024, 80
[38] Ultrasonic nondestructive evaluation of laser powder bed fusion 316L stainless steel
Kim, Changgong
Yin, Houshang
Shmatok, Andrii
Prorok, Barton C.
Lou, Xiaoyuan
Matlack, Kathryn H.
ADDITIVE MANUFACTURING, 2021, 38
[39] Fuzzy process optimization of laser powder bed fusion of 316L stainless steel
Ponticelli, Gennaro Salvatore
Venettacci, Simone
Giannini, Oliviero
Guarino, Stefano
Horn, Matthias
PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (03) : 437 - 458
[40] Fuzzy process optimization of laser powder bed fusion of 316L stainless steel
Gennaro Salvatore Ponticelli
Simone Venettacci
Oliviero Giannini
Stefano Guarino
Matthias Horn
Progress in Additive Manufacturing, 2023, 8 : 437 - 458

← 1 2 3 4 5 →