THE EFFECTS OF REYNOLDS NUMBER ON THE STALL AND PRE-STALL BEHAVIOUR OF COMPACT AXIAL COMPRESSORS

被引:0
|
作者
Hutchings, Jack [1 ]
Hall, Cesare [1 ]
机构
[1] Univ Cambridge, Whittle Lab, Cambridge, England
关键词
INSTABILITY; FLOW;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Compact axial compression systems are of interest to the domestic appliance industry. The associated low Reynolds number leads to high losses compared to large-scale compressors due to a transitional flow field with large regions of separation. This paper investigates how Reynolds number variations affect the three-dimensional and unsteady flow field in a compact compressor both pre-stall and in stall. An experimental study has been conducted using a scaled-up single-stage axial compressor across a Reynolds number range of 10(4) to 10(5). Steady and unsteady casing static pressure measurements, along with rotor upstream and downstream unsteady velocity measurements, have been used to observe the rotor flow field. As the Reynolds number is reduced below a critical value, 60,000 in the case of the compressor studied, the pressure rise coefficient of the compressor decreases. The exact value of the critical Reynolds number is expected to vary with the compressor geometry. This fall off in performance corresponds to an increase in the compressor rotor secondary flows. Prior to stall, a broadband hump at around 50% of the blade passing frequency is present in the near-field casing static pressure spectra. At Reynolds numbers below the critical value, multiple equally spaced peaks also appear around the peak of the broadband hump. The spacing of these peaks has been found to be exactly equal to the measured stall cell speed once rotating stall is established. When operating in stall, the stall cell is found to increase in size and slow down as Reynolds number decreases. The measured spectra and observed flow structures show that disturbances exist prior to stall at frequencies consistent with the frequencies within stall. The size and shape of the stall cells that form are related to the extent of the three-dimensional flow field present prior to stall. Below a critical value, all of these flow features are highly sensitive to Reynolds number.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] On the role of leading-edge tubercles in the pre-stall and post-stall characteristics of airfoils
    Gopinathan, V. T.
    Veeramanikandan, R.
    Rose, J. Bruce Ralphin
    Gokul, V
    EMERGING TRENDS IN ENGINEERING, SCIENCE AND TECHNOLOGY FOR SOCIETY, ENERGY AND ENVIRONMENT, 2018, : 307 - 314
  • [22] Experimental investigation on unsteady pre-stall behaviors of axial compressor with circumferential total pressure distortion
    Liu, Yang
    Du, Juan
    Li, Jichao
    Fan, Zhonggang
    Zhang, Min
    Zhao, Dan
    Sellier, Mathieu
    AEROSPACE SCIENCE AND TECHNOLOGY, 2025, 158
  • [23] Pre-Stall Instability Distribution Over a Transonic Compressor Rotor
    Gannon, A. J.
    Hobson, G. V.
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2009, 131 (05): : 0511061 - 05110611
  • [24] PRE-STALL INSTABILITY DISTRIBUTION OVER A TRANSONIC COMPRESSOR ROTOR
    Gannon, A. J.
    Hobson, G., V
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 6, PT A, 2008, : 2067 - 2076
  • [25] UNSTEADY PRE-STALL BEHAVIOR IN A CENTRIFUGAL COMPRESSOR WITH VANED DIFFUSER
    Suzuki, Yutaro
    Fujisawa, Nobumichi
    Ohta, Yutaka
    PROCEEDINGS OF ASME TURBO EXPO 2023: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2023, VOL 13D, 2023,
  • [26] PREDICTION OF ROTATING STALL DURING STARTUP FOR AXIAL COMPRESSORS
    Mito, Ryosuke
    Yamashita, Satoshi
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 2A, 2019,
  • [27] ACTIVE SUPPRESSION OF ROTATING STALL AND SURGE IN AXIAL COMPRESSORS
    DAY, IJ
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1993, 115 (01): : 40 - 47
  • [28] A PREDICTION MODEL FOR CORNER SEPARATION/STALL IN AXIAL COMPRESSORS
    Yu, Xianjun
    Liu, Baojie
    PROCEEDINGS OF THE ASME TURBO EXPO 2010: TURBOMACHINERY: AXIAL FLOW FAN AND COMPRESSOR AERODYNAMICS DESIGN METHODS, AND CFD MODELING FOR TURBOMACHINERY, VOL 7, PTS A-C, 2010, : 211 - 222
  • [29] ROTATING WAVES AS A STALL INCEPTION INDICTION IN AXIAL COMPRESSORS
    GARNIER, VH
    EPSTEIN, AH
    GREITZER, EM
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1991, 113 (02): : 290 - 302
  • [30] INCOMING STALL IDENTIFICATION IN AXIAL COMPRESSORS BY VIBRATION ANALYSIS
    D'Elia, Gianluca
    Dalpiaz, Giorgio
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 8, 2014,