Study of the rotary cleaners of the holes of cylindrical sieves on a vibrocentrifugal separator

被引：0

作者：

Stepanenko, Serhii ^{[1
]}

Lukach, Vasyl ^{[2
,3
]}

Demchuk, Iryna ^{[2
,3
]}

Kuzmych, Alvian ^{[1
]}

Kalinichenko, Roman ^{[2
,3
]}

Gerasymenko, Viacheslav ^{[2
,3
]}

Vasylyuk, Volodymyr ^{[2
,3
]}

机构：

[1] Inst Mech & Automat Agr Prod, 11-1 Vokzalna St, UA-08631 Hlevakha, Ukraine

[2] NUBiP Ukraine, Nizhyn Agrotech Inst, Nizhyn, Ukraine

[3] Natl Univ Life & Environm Sci Ukraine, Heroyiv Oborony st 15, UA-03041 Kyiv, Ukraine

来源：

PRZEGLAD ELEKTROTECHNICZNY | 2024年 / 100卷 / 08期

关键词：

Rotary cleaners; electrooscillography methods; vibrocentrifugal separator;

D O I：

10.15199/48.2024.08.33

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This document presents the results of research into the process of cleaning the holes of the vibrocentrifugal separator cylindrical sieves with rotary cleaners. The study of the nature of the movement of rotary sieve cleaners was carried out using electrooscillography methods. An original recording device with a sensor system was developed, which ensured the determination of the speed of the cylindrical sieve and the movement of the rotary cleaners of the sieve holes. The efficiency of the separator was confirmed experimentally

引用

页码：160 / 163

页数：4

共 50 条

[41] Study on the stress-strain distribution rule of the cylindrical part deep drawing with prefabricate-holes
Tan Li-guang
Xiao Xiao-ting
Wen Hua-dian
Chen Qiao-yu
EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3, 2011, 317-319 : 231 - 235
[42] EXPERIMENTAL STUDY ON THE FILM COOLING CHARACTERISTICS OF THE CYLINDRICAL HOLES EMBEDDED IN SINE-WAVE SHAPED TRENCH
Wei, Jian-sheng
Zhu, Hui-ren
Liu, Cun-liang
Song, Hui
Liu, Cong
Meng, Tong
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5C, 2016,
[43] Experimental Study of the Small Lubrication Holes on the Die Shoulder on the Formability in Cylindrical Cup Deep-Drawing
Shi, Yuqing
ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 428 - 431
[44] Theoretical and Experimental Study of an Acoustically Active Material Containing a Doubly-Periodic System of Cylindrical Holes
Popuzin, Vitaly V.
Zotov, Vladimir M.
Sumbatyan, Mezhlum A.
ADVANCED MATERIALS: TECHNIQUES, PHYSICS, MECHANICS AND APPLICATIONS, 2017, 193 : 293 - 308
[45] Experimental study on buckling behavior of composite cylindrical shells with and without circular holes under hydrostatic pressure
Wei, Ranfeng
Shen, Kechun
Pan, Guang
Li, Zhun
COMPOSITE STRUCTURES, 2023, 322
[46] Experimental study of power parameters of high-velocity warm closed-die punching of cylindrical holes
Val'ter, A.I.
Malenko, P.I.
Zakharov, S.K.
Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem), 2002, (04): : 12 - 14
[47] Experimental Study on the Film-Cooling Characteristics of the Cylindrical Holes Embedded in Sine-Wave Shaped Trench
Zhang, Bo-lun
Zhu, Hui-ren
Liu, Cun-liang
Wei, Jian-sheng
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2020, 142 (10):
[48] Experimental study on drilling load and hole quality during rotary ultrasonic helical machining of small-diameter CFRP holes
Geng, Daxi
Teng, Yunda
Liu, Yihang
Shao, Zhenyu
Jiang, Xinggang
Zhang, Deyuan
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 270 : 195 - 205
[49] Experimental study of transverse trench effect on unsteady film cooling effectiveness of backward cylindrical-holes with various compound angles
Zhang, Tiao
Pu, Jian
Xu, Shuai
Wang, Jian-hua
Wu, Wei-long
Wang, Fu-qiang
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 159
[50] Experimental Study on Heat Transfer of Leading Edge Film-Cooling With Counter-Inclined Cylindrical and Laid-Back Holes
Ye, Lin
Liu, Cun-liang
Liu, Feng
Yang, Yu-quan
Zhu, Hui-ren
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2020, 142 (06):

← 1 2 3 4 5 →