Enhancement of Scan Strategy for Improving Surface Characteristics of the SLMed Inconel 718 Alloy Component

The technique of selective laser melting has garnered significant interest due to its capacity to fabricate metal parts of any shape using a single printing process. In this study, a scan strategy was proposed for printing the inner structure part based on the varying performance of the Inconel 718 alloy part produced using different scan techniques. The test findings indicated that the surface quality of the printed material along the scan line exhibited significantly superior performance in comparison to that produced in a vertical direction to the scan line. Regarding the scan strategy, it is evident that the zigzag shape scan strategy exhibited superior performance in terms of the microstructure of the printed part. This is attributed to the more consistent cooling rate on each scan track. On the other hand, the square-framed scan strategy demonstrated a relatively optimal condition for the bending deformation of the printed part compared to other scan strategies. This is due to the more appropriate behavior of the molten pool during the outer edge printing process. After considering all of these criteria, a novel scan approach was created that included various scan strategies. The test findings indicated that the component produced using this novel scanning technique exhibited the combined benefits of both the square-shaped and zigzag-shaped scanning strategies.