Analysis of mechanical properties of stainless steel small diameter cold drawn wires

被引：0
|
作者：
Vaissette, Julien [1 ]
Mabru, Catherine [1 ]
Paredes, Manuel [1 ]
机构：
[1] Univ Toulouse, UPS, ICA, INSA,ISAE SUPAERO,MINES ALBI,CNRS, 3 Rue Caroline Aigle, F-31400 Toulouse, France
来源：
MATERIAL FORMING, ESAFORM 2024 | 2024年 / 41卷
关键词：
Residual Stress; Cold Drawing; Characterization; Small Diameter Wire; RESIDUAL-STRESSES;
D O I：
10.21741/9781644903131-78
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wire suppliers commonly only commit to the chemical composition and minimum mechanical resistance of their wires in their material certificates. Unfortunately, the cold drawing process induces residual stresses that potentially have a strong impact on the overall behavior of the wire. An explanation of the difference between the industrial 'tensile modulus' and 'flexural modulus' whereas the material has a unique 'Young Modulus' is proposed by mean of FEA and experimental tests. Moreover, in order to better estimate the complex material state of small wires (with a diameter smaller than one millimeter) a novel experimental approach has been developed to estimate the residual stress.
引用
收藏
页码：706 / 714
页数：9
相关论文
共 50 条
  • [21] Effects of the annealing temperature and time on the microstructural evolution and corresponding the mechanical properties of cold-drawn steel wires
    Park, D. B.
    Lee, J. W.
    Lee, Y. S.
    Park, K. T.
    Nam, W. J.
    METALS AND MATERIALS INTERNATIONAL, 2008, 14 (01) : 59 - 64
  • [22] Effects of drawing strain and annealing on the mechanical properties for heavily cold drawn hyper-eutectoid steel wires
    Yang, Y. S.
    Bae, J. G.
    Park, C. G.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4909 - +
  • [23] The effect of a Cr addition and transformation temperature on the mechanical properties of cold drawn hyper-eutectoid steel wires
    Hyung Rak Song
    Eui Goo Kang
    Chul Min Bae
    Choong Yeol Lee
    Duk Lak Lee
    Won Jong Nam
    Metals and Materials International, 2006, 12 : 239 - 243
  • [24] The effect of a Cr addition and transformation temperature on the mechanical properties of cold drawn hyper-eutectoid steel wires
    Song, Hyung Rak
    Kang, Eui Goo
    Bae, Chul Min
    Lee, Choong Yeol
    Lee, Duk Lak
    Nam, Won Jong
    METALS AND MATERIALS INTERNATIONAL, 2006, 12 (03) : 239 - 243
  • [25] Effects of the annealing temperature and time on the microstructural evolution and corresponding the mechanical properties of cold-drawn steel wires
    D. B. Park
    J. W. Lee
    Y. S. Lee
    K. T. Park
    W. J. Nam
    Metals and Materials International, 2008, 14 : 59 - 64
  • [26] DEFORMATION AND STRENGTHENING OF COLD-DRAWN STEEL WIRES
    SHI Deke LIU Junhai HAO Hongqi Xi'an Jiaotong University
    Xi'an
    China
    Acta Metallurgica Sinica(English Edition), 1992, (01) : 29 - 32
  • [27] Ratchetting in Cold-Drawn Pearlitic Steel Wires
    Lunwei Liang
    Liang Xiang
    Yunjiang Wang
    Yan Chen
    Haiying Wang
    Lanhong Dai
    Metallurgical and Materials Transactions A, 2019, 50 : 4561 - 4568
  • [28] Ratchetting in Cold-Drawn Pearlitic Steel Wires
    Liang, Lunwei
    Xiang, Liang
    Wang, Yunjiang
    Chen, Yan
    Wang, Haiying
    Dai, Lanhong
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (10): : 4561 - 4568
  • [29] Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires
    Durgaprasad, A.
    Giri, S.
    Lenka, S.
    Kundu, S.
    Mishra, S.
    Chandra, S.
    Doherty, R. D.
    Samajdar, I.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (10): : 4583 - 4597
  • [30] The mechanical properties of high carbon steel wires drawn in conventional and hydrodynamic dies
    Suliga, M., 2013, Faculty of Metallurgy (52):
12345