Permanent magnet synchronous machine design for low-noise drive systems

被引：0
|
作者：
Pop-Piglesan, F. [1 ]
Jurca, F. [1 ]
Oprea, C. [1 ]
Martis, C. [1 ]
机构：
[1] Tech Univ Cluj Napoca, Dept Elect Machines & Drives, RO-400114 Cluj Napoca, Romania
来源：
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2014) AND INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2014) | 2014年
关键词：
COGGING TORQUE; REDUCTION; RIPPLE;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present work aims to define a methodology for designing low-noise Permanent Magnet Synchronous Machines (PMSMs) by addressing the issues of average torque, torque ripple, cogging torque and radial forces through a comparative analysis between different motor topologies with similar envelope and output characteristics for light traction applications. Four PMSMs topologies with different stator and rotor topologies were considered while keeping constant the main geometrical dimensions. The influence of the number of poles and slots, air gap length and winding configuration on the average electromagnetic torque, cogging torque and air gap radial forces is presented.
引用
收藏
页码：1387 / 1399
页数：13
相关论文
共 50 条
  • [1] Mathematical Model of Radial Electromagnetic Force for Low-Noise Synchronous Permanent Magnet Drive
    Golubev, Alexander
    Martynov, Vladimir
    Aleynikov, Alexey
    Karachov, Valery
    2019 INTERNATIONAL URAL CONFERENCE ON ELECTRICAL POWER ENGINEERING (URALCON), 2019, : 324 - 328
  • [2] Design and Optimization of a Permanent Magnet Synchronous Machine for Low Vibration and Noise Applications
    Wang, Qian
    Li, Jian
    Qu, Ronghai
    Lu, Yang
    2018 21ST INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2018, : 280 - 284
  • [3] Design Considerations for Control of Traction Drive with Permanent Magnet Synchronous Machine
    Peroutka, Zdenek
    Zeman, Karel
    2008 13TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-5, 2008, : 1529 - 1534
  • [4] Design and magnetic noise reduction of the Surface Permanent Magnet Synchronous Machine
    Fakam, Mathias
    Hecquet, Michel
    Lanfranchi, Vincent
    2014 NINTH INTERNATIONAL CONFERENCE ON ECOLOGICAL VEHICLES AND RENEWABLE ENERGIES (EVER), 2014,
  • [5] Design Method of Capacitor Network for Interior Permanent Magnet Synchronous Machine Drive
    Choi, Hyeon-gyu
    Ha, Jung-Ik
    2019 22ND INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2019), 2019, : 4780 - 4784
  • [6] Design of Interior Permanent Magnet Synchronous Machine for Two-Drive-Transmission
    An, Jeongki
    Binder, Andreas
    2015 INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS FOR AIRCRAFT, RAILWAY, SHIP PROPULSION AND ROAD VEHICLES (ESARS), 2015,
  • [7] Design and Hardware Realization of Low Voltage Permanent Magnet Synchronous Motor Drive
    Surya, R.
    Allirani, S.
    2022 SECOND INTERNATIONAL CONFERENCE ON ADVANCES IN ELECTRICAL, COMPUTING, COMMUNICATION AND SUSTAINABLE TECHNOLOGIES (ICAECT), 2022,
  • [8] Control of Permanent Magnet Synchronous Machine Wheel Drive for Low-Floor Tram
    Peroutka, Zdenek
    Zeman, Karel
    Krus, Frantisek
    Kosta, Frantisek
    EPE: 2009 13TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-9, 2009, : 4121 - +
  • [9] Low-Noise Initial Position Detection Method for Sensorless Permanent Magnet Synchronous Motor Drives
    Bi, Guangdong
    Wang, Gaolin
    Zhang, Guoqiang
    Zhao, Nannan
    Xu, Dianguo
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2020, 35 (12) : 13333 - 13344
  • [10] Design and Analysis of a Low Torque Ripple Permanent Magnet Synchronous Machine for Flywheel Energy Storage Systems
    Sun, Yubo
    Zhao, Zhenghui
    Zhang, Qian
    ENERGIES, 2024, 17 (24)
12345