INVESTIGATION ON FLOWFIELD AND FUEL/AIR PREMIXING UNIFORMITIES OF LOW SWIRL INJECTOR FOR LEAN PREMIXED GAS TURBINES

Based on the development trend of incorporating fuel holes into swirler-vanes and the advantages of wide operating conditions as well as low NOx emissions of LSI, this paper proposes an original lean premixed LSI with a convergent outlet. The influence of key structures on flowfields and fuel/air premixing uniformities of LSI is investigated by the combination of laser diagnostic experiments and numerical simulations. The flowfields of LSI shows that the main recirculation zone is detached from the convergent outlet and its axial dimensions are smaller than that of HSI, which can decrease the residence time of high-temperature gas to reduce NOx emissions. The fuel/air premixing characteristics show that the positions and diameters of fuel holes affect fuel/air premixing by changing the penetration depth of fuel. And when the penetration depth is moderate, it can give full play to the role of swirling air in enhancing premixing of fuel and air. In addition, the increase of the length of the premixing section can improve the uniformity of fuel/ar premixing, but it can also weaken the swirl intensity and increase the residence time of the combustible mixture within the LSI, which can affect flame stability and increase the risk of auto-ignition. Therefore, the design and selection of LSI structural parameters should comprehensively consider the requirements of fuel/air mixing uniformity, flame stability and avoiding the risk of auto-ignition. The results can provide the technical basis for LSI design and application in aero-derivative and land-based gas turbine combustors.