Effect of preparation conditions of nanocrystalline Pd/MgO catalysts on their performance in selective hydrogenation of acetylene

In the present work, an alkoxide sol-gel method was applied to prepare Pd/MgO catalysts. The sol-gel procedure was followed by supercritical drying (aerogels) or conventional drying (xerogels) in a furnace. These materials were compared with the impregnated samples. The Pd loading was 1 wt% in all the cases. The as -prepared catalysts were characterized by a set of physicochemical methods. Both the type of the Pd precursor and the preparation route were found to affect the porous structure of the materials as well as the dispersion of the palladium particles and their localization over the MgO support. Both the xerogel and incipient wetness impregnation methods lead to a narrower pore size distribution in comparison to the aerogel technique. The most dispersed particles with an average size of - 2.0 -2.2 nm were observed for the samples prepared by xerogel and impregnation methods. In the case of aerogel-prepared samples, metallic palladium particles possess bimodal distribution with average diameters of 4.3 and 8.4 nm. The best catalytic performance in acetylene hydrogenation to ethylene (50 % acetylene conversion at 37 degrees C with selectivity -60 %) was observed for the Pd/MgO catalyst prepared via the aerogel route using [Pd(NH 3 ) 4 ](NO 3 ) 2 . Compared to other samples, this material is characterized by relatively weak metal -support interactions and the availability of active sites for reactants, which ensures the kinetic mode of the hydrogenation reaction (E a = 74.9 kJ/mol).