FORMATION OF FUNCTIONAL AND TECHNOLOGICAL PROPERTIES OF THE FILM FROM INTESTINAL RAW MATERIALS DURING THE DRYING PROCESS

被引:0
|
作者
Pak, A. [1 ]
Onishchenko, V. [2 ]
Yancheva, M. [3 ]
Onyshchenko, A. [2 ,4 ]
Grynchenko, N.
Inzhyyants, S. [5 ]
机构
[1] State Biotechnol Univ, Dept Phys & Math, Alchevskih Str 44, UA-61002 Kharkiv, Ukraine
[2] State Biotechnol Univ, Dept Meat Technol, Alchevskih Str 44, UA-61002 Kharkiv, Ukraine
[3] CAPS FOOD Syst LLC, Zaliznychnyi lane 3-4, UA-62302 Derhachy, Ukraine
[4] Ukrainian Engn Pedag Acad, Dept Mkt & Trade Entrepreneurship, Ukrainian Pedag st 16, UA-61003 Kharkiv, Ukraine
[5] Ltd Chuhuyivskyy Myasokombinat, Heroyiv Chornobyltsiv str 50, UA-63503 Chuguyiv, Ukraine
来源
关键词
film from intestinal raw materials; drying process; hygroscopic properties; elastic-plastic properties;
D O I
10.15673/fst.v18i1.2850
中图分类号
TS2 [食品工业];
学科分类号
0832 ;
摘要
The purpose of the research is formation of the functional and technological properties of a multi-purpose film from intestinal raw materials during drying. Its hygroscopic properties after drying at temperatures ranging from 40 to 70 degrees C were studied. It was established that the increase of the drying temperature leads to the decrease in the amount of moisture that the sample absorbs from the environment. Ranges of relative air humidity at which it is possible to store dried products in vapor-permeable packaging have been determined. It is noted that the storage of the multifunctional film is possible in a vapor-tight package with an increase in air humidity relative to the recommended ranges. The operations of packing dried film and making sausage casings from it, which follow after drying operation, are described. It was noted, that during these operations there are mechanical deformations of the film bending at angles up to 180 degrees. It was established, that there is no violation of the integrity of the film, provided that it is bent to an angle of 180 degrees during the packaging of finished products and the production of sausage casings from it. The integrity of the manufactured casings after their recovery during the production of sausage products has been proven. The elastic-plastic properties of the intestinal raw material film obtained at different drying temperatures were investigated. It was found, that strength of the film increases and its plasticity decreases in case of increasing the drying temperature. It is noted that, from the point of view of strength, the highest drying temperature from the range of 40- - 70 degrees & Scy;. From the point of view of plastic properties, the minimum temperature should be chosen from the specified range. Studies of the drying process of a wet multifunctional film from intestinal raw materials have determined the rational values of the temperature and duration of the its drying. It is noted that during the selection of the drying temperature in the technology of obtaining a multifunctional film from intestinal raw materials, the determining factor is the functional and technological properties of the obtained semi-finished product, which depend on the drying temperature.
引用
收藏
页码:73 / 83
页数:11
相关论文
共 50 条
  • [41] Study of Technological Properties and Processing Feasibility for Various Types of Vanadium Raw Materials in Russia
    Volkov, A. I.
    Stulov, P. E.
    Kologrieva, U. A.
    Charkin, A. F.
    METALLURGIST, 2024, 67 (9-10) : 1379 - 1395
  • [42] Influence of Raw Materials and Technological Factors on the Sorption Properties of Blast-Fuel Coke
    Miroshnichenko, Denis
    Shmeltser, Kateryna
    Kormer, Maryna
    Sahalai, Daryna
    Pyshyev, Serhiy
    Kukhar, Oleg
    Korchak, Bohdan
    Chervinskyy, Taras
    CHEMENGINEERING, 2024, 8 (02)
  • [43] Effects of raw materials on the technological properties of brick compositions using a statistical design approach
    Correia, S. L.
    Grun, E.
    Denardi, C. D.
    Hotza, D.
    Folgueras, M. V.
    ADVANCED POWDER TECHNOLOGY V, 2006, 530-531 : 486 - +
  • [44] Study of Technological Properties and Processing Feasibility for Various Types of Vanadium Raw Materials in Russia
    A. I. Volkov
    P. E. Stulov
    U. A. Kologrieva
    A. F. Charkin
    Metallurgist, 2024, 67 : 1379 - 1395
  • [45] Sigilmasa: a typo-technological approach to building, site formation processes and handling of raw materials
    Mensan, Romain
    Fauvelle, Francois-Xavier
    Erbati, Elarbi
    Bruxelles, Laurent
    MELANGES DE LA CASA DE VELAZQUEZ, 2017, 47 (02): : 185 - 206
  • [46] Investigation of kinetics of drying the knobby grates manufactured from secondary raw materials
    Barabanov, N.N.
    Zemskova, V.T.
    Plasticheskie Massy: Sintez Svojstva Pererabotka Primenenie, 2002, (10): : 38 - 40
  • [47] Film formation properties of asphalt emulsion under ambient temperature drying
    Ouyang, Jian
    Meng, Yan
    Zarei, Sohrab
    Yang, Hanwen
    INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2023, 24 (01)
  • [48] MULTIFACETED ANALYSIS OF GLAZED CERAMICS FROM JORDAN: RAW MATERIALS AND TECHNOLOGICAL ASPECTS
    Alawneh, Firas
    Balaawi, Fadi
    Aighazawi, Raed
    CONSERVATION SCIENCE IN CULTURAL HERITAGE, 2019, 19 : 283 - 306
  • [49] Inhomogeneity in the drying process of gelatin film formation: NMR microscopy and relaxation study
    Ghoshal, Sushanta
    Mattea, Carlos
    Stapf, Siegfried
    CHEMICAL PHYSICS LETTERS, 2010, 485 (4-6) : 343 - 347
  • [50] Preparation and properties of endothermic functional ceramics with iron tailings as raw materials
    Meng, Junping
    Peng, Jingxuan
    Srinivasakannan, C.
    Duan, Xinhui
    Liang, Jinsheng
    MATERIALS RESEARCH EXPRESS, 2020, 7 (05)