FORMATION OF FUNCTIONAL AND TECHNOLOGICAL PROPERTIES OF THE FILM FROM INTESTINAL RAW MATERIALS DURING THE DRYING PROCESS

被引:0
|
作者
Pak, A. [1 ]
Onishchenko, V. [2 ]
Yancheva, M. [3 ]
Onyshchenko, A. [2 ,4 ]
Grynchenko, N.
Inzhyyants, S. [5 ]
机构
[1] State Biotechnol Univ, Dept Phys & Math, Alchevskih Str 44, UA-61002 Kharkiv, Ukraine
[2] State Biotechnol Univ, Dept Meat Technol, Alchevskih Str 44, UA-61002 Kharkiv, Ukraine
[3] CAPS FOOD Syst LLC, Zaliznychnyi lane 3-4, UA-62302 Derhachy, Ukraine
[4] Ukrainian Engn Pedag Acad, Dept Mkt & Trade Entrepreneurship, Ukrainian Pedag st 16, UA-61003 Kharkiv, Ukraine
[5] Ltd Chuhuyivskyy Myasokombinat, Heroyiv Chornobyltsiv str 50, UA-63503 Chuguyiv, Ukraine
来源
关键词
film from intestinal raw materials; drying process; hygroscopic properties; elastic-plastic properties;
D O I
10.15673/fst.v18i1.2850
中图分类号
TS2 [食品工业];
学科分类号
0832 ;
摘要
The purpose of the research is formation of the functional and technological properties of a multi-purpose film from intestinal raw materials during drying. Its hygroscopic properties after drying at temperatures ranging from 40 to 70 degrees C were studied. It was established that the increase of the drying temperature leads to the decrease in the amount of moisture that the sample absorbs from the environment. Ranges of relative air humidity at which it is possible to store dried products in vapor-permeable packaging have been determined. It is noted that the storage of the multifunctional film is possible in a vapor-tight package with an increase in air humidity relative to the recommended ranges. The operations of packing dried film and making sausage casings from it, which follow after drying operation, are described. It was noted, that during these operations there are mechanical deformations of the film bending at angles up to 180 degrees. It was established, that there is no violation of the integrity of the film, provided that it is bent to an angle of 180 degrees during the packaging of finished products and the production of sausage casings from it. The integrity of the manufactured casings after their recovery during the production of sausage products has been proven. The elastic-plastic properties of the intestinal raw material film obtained at different drying temperatures were investigated. It was found, that strength of the film increases and its plasticity decreases in case of increasing the drying temperature. It is noted that, from the point of view of strength, the highest drying temperature from the range of 40- - 70 degrees & Scy;. From the point of view of plastic properties, the minimum temperature should be chosen from the specified range. Studies of the drying process of a wet multifunctional film from intestinal raw materials have determined the rational values of the temperature and duration of the its drying. It is noted that during the selection of the drying temperature in the technology of obtaining a multifunctional film from intestinal raw materials, the determining factor is the functional and technological properties of the obtained semi-finished product, which depend on the drying temperature.
引用
收藏
页码:73 / 83
页数:11
相关论文
共 50 条
  • [1] Changes in technological properties and microstructure of clayey raw materials from the Corumbatai Formation upon drying: Relevance to dry route tilemaking process
    Azzi, Andrezza de Almeida
    Uhlik, Peter
    Osacky, Marek
    Zanardo, Antenor
    Palkova, Helena
    APPLIED CLAY SCIENCE, 2018, 157 : 92 - 101
  • [2] A model for the drying process during film formation in waterborne acrylic coatings
    Carrà, S
    Pinoci, D
    Carrà, S
    MACROMOLECULAR SYMPOSIA, 2002, 187 : 585 - 596
  • [3] Concentrates of polyphenols from grape raw materials and their functional properties
    Ogay, Yu A.
    Chernousova, I., V
    Saitsev, G. P.
    Mosolkova, V. Y.
    Zhilyakova, T. A.
    Grishchin, Yu, V
    INTERNATIONAL CONFERENCE ON PRODUCTION AND PROCESSING OF AGRICULTURAL RAW MATERIALS, 2021, 640
  • [4] Effects of multicomponent brine on functional and technological properties of camel meat raw materials and finished products
    Kenenbay, Shynar, I
    Tayeva, Aigul M.
    Ussembaeva, Zhibek K.
    Syzdykova, Laila S.
    Kaimbayeva, Leila A.
    Kozhakhiyeva, Madina O.
    FOOD SCIENCE AND TECHNOLOGY, 2019, 39 : 697 - 702
  • [5] EVOLUTION OF PHYSICAL PROPERTIES OF LIQUID FILM DURING EVAPORATION PROCESS: DRYING AND EVAPORATION PROCESS OF INKJET LIQUID FILM
    Kichise, Keisuke
    Harada, Yoshihiro
    Kuramoto, Shinichi
    Kadonaga, Masami
    Fushinobu, Kazuyoshi
    Kato, Koichi
    PROCEEDINGS OF ASME 2023 INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, INTERPACK2023, 2023,
  • [6] Film formation from monodisperse acrylic latices 2. Influence of drying temperature on the film formation process
    Nijenhuis, KT
    Zohrehvand, S
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2005, 284 (01) : 129 - 138
  • [7] Change of Mechanical Properties of Polyethylene Film Materials during Their Modification by Technological Applications and during Aging
    Domantsevich, N., I
    Yatsyshyn, B. P.
    PHYSICS AND CHEMISTRY OF SOLID STATE, 2020, 21 (03): : 510 - 518
  • [8] Technological Properties of Clay Raw Materials of the Northwest Orenburg Region
    Kushnareva, O. P.
    Kanygina, O. N.
    Chetverikova, D. K.
    GLASS AND CERAMICS, 2024, 81 (1-2) : 68 - 72
  • [9] Investigation of frying process of meat sausages in glued casings from intestinal raw materials
    Mykhailov, Valerii
    Onyshchenko, Viacheslav
    Pak, Andrii
    Bredykhin, Vadym
    Zahorulko, Oleksii
    UKRAINIAN FOOD JOURNAL, 2021, 10 (02) : 387 - 398
  • [10] Transformation of grains of technological raw materials in the process of obtaining fine powders
    Gembitskaya, Irina M.
    V. Gvozdetskaya, Maria
    JOURNAL OF MINING INSTITUTE, 2021, 249 : 401 - 407