Corrosion kinetics of T91 steel under low oxygen conditions (10-7 wt% O) in lead-bismuth eutectic at 500 ° C

被引:0
|
作者
Tian, Shujian [1 ]
Jiang, Zhizhong [2 ]
Zhu, Ge [1 ]
Luo, Lin [2 ]
Liu, Jing [2 ]
机构
[1] North China Univ Water Resources & Elect Power, Coll Energy & Power Engn, Zhengzhou 450045, Peoples R China
[2] Chinese Acad Sci, Inst Nucl Energy Safety Technol, Hefei Inst Phys Sci, Hefei 230031, Anhui, Peoples R China
来源
关键词
Lead -based reactor; Lead -bismuth eutectic; Corrosion; T91; OXIDE SCALE; BEHAVIOR; LBE;
D O I
10.1016/j.mtcomm.2024.109106
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Among the advanced reactor designs of the fourth generation, the Lead-cooled Fast Reactor (LFR) stands out as one of six distinct types. The corrosion caused by the liquid Lead-Bismuth Eutectic (LBE) on structural materials is recognized as a significant obstacle hindering the development of LFR. The corrosion kinetics of T91 steel in static LBE with 10-7 wt% oxygen at 500 degrees C is analyzed in this study. The formed oxide scale consists of an outer (Fe, Cr)3O4 layer with a Fe-Cr spinel structure and an inner internal oxidation zone (IOZ). The thickness evolution of the oxide layers follows a parabolic rule, with rate constants determined for different layers. The dissolution rate of metals into the LBE decreases over time, indicating diminishing the concentration gradient of Fe across the oxide layer-LBE interface. The observed deviations from expected norms may be attributed to dynamic flow conditions and non-isothermal loop experiments, which accelerate Fe diffusion into LBE.
引用
收藏
页数:7
相关论文
共 50 条
  • [41] Mechanical behavior of coated T91 steel in contact with lead-bismuth liquid alloy at 300 °C
    Serre, I. Proriol
    Diop, I.
    David, N.
    Vilasi, M.
    Vogt, J. -B.
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (19): : 4521 - 4527
  • [42] The role of oxide films in preventing liquid metal embrittlement of T91 steel exposed to liquid lead-bismuth eutectic
    Gong, Xing
    Marmy, Pierre
    Yin, Yuan
    JOURNAL OF NUCLEAR MATERIALS, 2018, 509 : 401 - 407
  • [43] Oxygen-enhanced dissolution corrosion of austenitic stainless steel 316 L in static lead-bismuth eutectic at 500 °C
    Maia, Eloa Lopes
    Tsybanev, Aleksandr
    Gavrilov, Serguei
    Tsisar, Valentyn
    Lim, Jun
    De Graeve, Iris
    CORROSION SCIENCE, 2024, 236
  • [44] Low cycle fatigue behaviour of T91 martensitic steel at 300 °C in air and in liquid lead bismuth eutectic
    Verleene, A.
    Vogt, J. -B.
    Serre, I.
    Legris, A.
    INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (08) : 843 - 851
  • [45] Performance of the new ferritic/martensitic steel SIMP against liquid lead-bismuth eutectic corrosion: Comparison with T91 and 316L steels
    Ma, Zhiwei
    Shen, Tielong
    Zhou, Ting
    Wang, Zhiguang
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2023, 74 (02): : 221 - 232
  • [46] New insight of the enhanced oxidation resistance of T91 steel in 450 °C liquid lead-bismuth eutectic by adding Al and Si element
    Feng, Shaowu
    Dai, Hailong
    Sun, Xingyue
    Jiang, Kejian
    Qiu, Zhi
    Chen, Xu
    Chen, Gang
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2025, 204 : 29 - 46
  • [47] Enhancing corrosion resistance of T91 F/M steel in liquid lead-bismuth (LBE) by slurry FeAl coating
    Wang, Wen
    Yang, Liujie
    Qian, Hongchen
    Zhu, Zhaoguang
    Zhu, Guangjian
    Tan, Jibo
    Huang, Jinyang
    Lu, Jintao
    Kuang, Wenjun
    JOURNAL OF NUCLEAR MATERIALS, 2025, 603
  • [48] Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 x 10-7 mass% dissolved oxygen
    Tsisar, Valentyn
    Gavrilov, Serguei
    Schroer, Carsten
    Stergar, Erich
    CORROSION SCIENCE, 2020, 174 (174)
  • [49] Fracture mechanics behavior of the T91 martensitic steel in contact with liquid lead-bismuth eutectic for application in an accelerator driven system
    Auger, T.
    Gorse, D.
    Hamouche-Hadjem, Z.
    Van den Bosch, J.
    Coen, G.
    Almazouzi, A.
    Hojna, A.
    Dalikova, K.
    Di Gabriele, F.
    Serrano, M.
    Gessi, A.
    Agostini, P.
    Vogt, J. -B.
    Serre, I.
    JOURNAL OF NUCLEAR MATERIALS, 2011, 415 (03) : 293 - 301
  • [50] Insight into the fretting corrosion behavior of 316L steel in liquid lead-bismuth eutectic at 500°C
    Sun, Qi
    Qin, Yu
    Fan, Xiaoqiang
    Liang, Yanxiang
    Mi, Xue
    Zhu, Minhao
    JOURNAL OF NUCLEAR MATERIALS, 2025, 603