Inner Modulation Controlled Process for Suppression of Chatter Vibration in Double Inserts Turning

A novel cutting manner is presented to control regenerative chatter vibration in double inserts cutting, in which the forward and the backward inserts cut workpiece simultaneously with phase difference in the modulation of finished surface. In double inserts cutting, the forward insert is clamped above the backward insert. Both the inserts are positioned symmetrically with a height offset with respect to the workpiece rotation center. The forward insert mainly removes the material; while the backward insert cuts a part of the inner modulation to lose the regular excitation. The exciting force is also reduced with the cutting thickness of the forward insert after a workpiece revolution. Because the theoretical position offset of the inserts in the feed direction is small, the side cutting edges of inserts are aligned in the same position. The process parameters are determined by estimating the removal volume of the backward insert with the phase shift. The range of the cutting speed and the height offset are given by the frequency of the chatter vibration, which is nearly single degree of freedom. The proposed cutting maninsert and double inserts cuttings.