Design and evaluation of a monostable symmetric piezoelectric energy harvester based on cantilever structure and magnetic excitation action

This work proposes a monostable symmetric piezoelectric energy harvester based on the cantilever structure and magnetic excitation action (M-PEH). The governing equations of M-PEH are derived based on its kinematic properties. The intrinsic frequency of the piezoelectric cantilever beam was obtained by modal simulation. It has been demonstrated that the mode of arrangement of the magnetic poles has a significant effect on the output voltage of the energy harvester. The proposed M-PEH has four driving magnets with a mass of 6 g and a radial driving distance of 15 mm for more efficient energy harvesting. The experimental results show that the maximum voltage of the M-PEH with the double U-type rotor was 31.2 V at 240 rpm and 110 k Omega external resistance. The average power of the PEH with the double U-type rotor was 16.562 mW at a speed of 240 rpm with an outer resistance of 20 k Omega. The energy harvester with a double U-type rotor can realize a voltage output of not less than 10 V in the range of 60-300 rpm when the same poles of the tip magnets are arranged outward. The M-PEH can also easily light up LEDs or miniature electronic watches with speeds of 120 rpm and 240 rpm. This further proves that the proposed piezoelectric energy harvester (M-PEH) has a better energy harvesting effect and great potential for practical applications.