Modeling of Processes in the Combustion Chamber of a Hybrid Solid-Fuel Engine

被引：1

作者：

Stamov, L. I. ^{[1
,2
]}

Tyurenkova, V. V. ^{[1
,2
]}

Mikhalchenko, E. V. ^{[1
,2
]}

Chen, F. ^{[3
]}

Meng, Yu. ^{[3
]}

机构：

[1] Russian Acad Sci, Natl Res Ctr Kurchatov Inst, Sci Res Inst Syst Anal, Moscow, Russia

[2] Lomonosov Moscow State Univ, Fac Mech & Math, Chair Wave & Gas Dynam, Moscow, Russia

[3] Shanghai Jiao Tong Univ, Sch Aeronaut & Astronaut, Shanghai, Peoples R China

来源：

MOSCOW UNIVERSITY MECHANICS BULLETIN | 2024年 / 79卷 / 03期

关键词：

hybrid engines; solid fuel; numerical simulation; combustion; regression rate;

D O I：

10.3103/S0027133024700134

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper presents the results of three-dimensional computational modeling of processes in the combustion chamber of a hybrid solid-fuel engine. Polymethylmethacrylate was used as a solid fuel, and air was used as an oxidizer. In the model used, the heated oxidizer in gaseous form was fed into the combustion chamber at supersonic speed. As a result of the interaction of the oxidizer with the surface of the solid fuel, it begins to warm up and decompose with the release of flammable gases. The geometry of the combustion chamber and solid fuel was based on experimental work. The results of a series of calculations for various geometries of the combustion chamber were presented. The distribution of physical parameters corresponding to the diffusion mode of combustion was obtained.

引用

页码：97 / 101

页数：5

共 50 条

[31] Investigations on the influence of swirl intensity on solid-fuel ramjet engine
Musa, Omer
Chen Xiong
Zhou Chang-sheng
Li Ying-kun
Liao Wen-He
COMPUTERS & FLUIDS, 2018, 167 : 82 - 99
[32] INVESTIGATION OF SOLID-FUEL, DUAL-MODE COMBUSTION RAMJETS
VAUGHT, C
WITT, M
NETZER, D
GANY, A
JOURNAL OF PROPULSION AND POWER, 1992, 8 (05) : 1004 - 1011
[33] STEADY FLOW COMBUSTION MODEL FOR SOLID-FUEL RAMJET PROJECTILES
NUSCA, MJ
JOURNAL OF PROPULSION AND POWER, 1990, 6 (03) : 348 - 352
[34] Investigation on the effect of diaphragm on the combustion characteristics of solid-fuel ramjet
Gong, Lunkun
Chen, Xiong
Yang, Haitao
Li, Weixuan
Zhou, Changsheng
ACTA ASTRONAUTICA, 2017, 139 : 449 - 462
[35] ON THE THEORY OF HIGH-FREQUENCY PULSATIONS INDUCED BY INSTABILITY OF THE COMBUSTION PROCESS IN A SOLID-FUEL ROCKET ENGINE.
Aslanov, S.K.
Soviet Aeronautics (English translation of Izvestiya VUZ, Aviatsionnaya Tekhnika), 1973, 16 (01): : 31 - 35
[36] Numerical modeling of the processes within the combustion chamber of a solid propellant rocket engine during the stabilization of the design operation mode
Amarantov, G. N.
Egorov, M. Yu.
Egorov, S. M.
Egorov, D. M.
Nekrasov, V. I.
FLUID DYNAMICS, 2011, 46 (03) : 467 - 478
[37] Numerical modeling of the processes within the combustion chamber of a solid propellant rocket engine during the stabilization of the design operation mode
G. N. Amarantov
M. Yu. Egorov
S. M. Egorov
D. M. Egorov
V. I. Nekrasov
Fluid Dynamics, 2011, 46 : 467 - 478
[38] Modeling a Combustion Chamber of a Pulse Detonation Engine
Smirnov, Nickolay
Nikitin, Valeriy
Mikhalchenko, Elena
Stamov, Lyuben
FIRE-SWITZERLAND, 2023, 6 (09):
[39] Choice of working parameters of a solid-fuel jet engine of unguided aircraft
Makeev V.I.
Pushkarev Yu.I.
Russian Aeronautics (Iz VUZ), 1600, Allerton Press Incorporation (56): : 344 - 353
[40] Numerical approach to the assessment of air pollution by solid-fuel combustion products
Gvozdyakov D.V.
Gubin V.E.
Chemical and Petroleum Engineering, 2017, 53 (1-2) : 56 - 59

← 1 2 3 4 5 →