Determination of the ductile-to-brittle transition temperature of NIOMOL 490 K steel welded joints

被引：1
|
作者：
Maksimovic, Ana [1 ]
Milovic, Ljubica [2 ]
Zecevic, Bojana [1 ]
Aleksic, Vujadin [3 ]
Bekric, Dragoljub [4 ]
机构：
[1] Innovat Ctr Fac Technol & Met, Karnegijeva 4, Belgrade 11120, Serbia
[2] Univ Belgrade, Fac Technol & Met, Karnegijeva 4, Belgrade 11120, Serbia
[3] IMS Inst, Bulevar Vojvode Mis 43, Belgrade 11040, Serbia
[4] Univ Belgrade, Fac Mech Engn, Kraljice Marije 16, Belgrade 11120, Serbia
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2024年 / 131卷
关键词：
Transition temperature; Mechanical properties; NIOMOL; 490K; Nil Ductility Transition Temperature; FRACTURE-TOUGHNESS; CONSTRAINT;
D O I：
10.1016/j.tafmec.2024.104404
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper is dedicated to the ductile -brittle transition behaviour of the microalloyed structural steel NIOMOL 490 K. This steel grade is used for welded pressure vessels subjected to dynamic loads and operating at sub -zero temperatures. Therefore, it must have an acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel was carried out using the Charpy V -notch impact test in the temperature range between -60 degrees C and + 60 degrees C. The notches were located in parent material, heat affected zone and weld metal. In this paper, the tensile strength properties at ambient temperature and the nil ductility temperature in the temperature range from -60 degrees C to + 60 degrees C are presented.
引用
收藏
页数：8
相关论文
共 50 条
  • [31] A crack tip blunting analysis in the ductile-to-brittle transition of a structural steel
    Tosal, L
    Rodríguez, C
    Belzunce, FJ
    Betegón, C
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2000, 23 (04) : 365 - 369
  • [32] DYNAMIC EFFECTS ON FRACTURE TOUGHNESS FOR FERRITIC STEEL IN THE DUCTILE-TO-BRITTLE TRANSITION
    Jacquemoud, C.
    Delvallee-Nunio, I.
    Balestreri, F.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6A, 2017,
  • [33] FRACTURE AND FATIGUE BEHAVIOUR OF NIOMOL 490K WELDED JOINT
    Manjgo, Mersida
    Sedmak, Aleksandar
    Grujic, Biljana
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2008, 8 (03): : 149 - 158
  • [34] Electromigration induced ductile-to-brittle transition in lead-free solder joints
    Ren, Fei
    Nah, Jae-Woong
    Tu, K. N.
    Xiong, Bingshou
    Xu, Luhua
    Pang, John H. L.
    APPLIED PHYSICS LETTERS, 2006, 89 (14)
  • [35] Ductile-to-Brittle Transition of Flip-Chip Solder Joints Influenced by Electromigration
    Lu, Yu-Dong
    En, Yun-Fei
    He, Xiao-Qi
    Niu, Gang
    Pecht, Michael
    Wang, Xin
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 824 - 827
  • [36] USE OF A METHOD OF MEASUREMENT OF HARDNESS UNDER LOAD FOR DETERMINATION OF THE DUCTILE-TO-BRITTLE TRANSITION-TEMPERATURE
    BELIK, AV
    TURSUNOV, DA
    BELOSHENKO, VA
    DUGAR, SV
    INDUSTRIAL LABORATORY, 1992, 58 (07): : 621 - 624
  • [37] DUCTILE-TO-BRITTLE TRANSITION-TEMPERATURE AS A MEASURE OF THE CRACK RESISTANCE OF STEELS
    KRASOVSKII, AY
    STRENGTH OF MATERIALS, 1985, 17 (10) : 1439 - 1446
  • [38] Temperature-induced ductile-to-brittle transition of bulk metallic glasses
    Li, G.
    Jiang, M. Q.
    Jiang, F.
    He, L.
    Sun, J.
    APPLIED PHYSICS LETTERS, 2013, 102 (17)
  • [39] GUIDING PRINCIPLES FOR LOWERING DUCTILE-TO-BRITTLE TRANSITION TEMPERATURE IN BCC METALS
    CONRAD, H
    JOM-JOURNAL OF METALS, 1964, 16 (01): : 102 - &
  • [40] Ductile-to-brittle transition criterion of metallic glasses
    Li, X. T.
    Liu, Z. Q.
    Zhang, Z. J.
    Zhang, P.
    Zhang, Z. F.
    PHYSICAL REVIEW MATERIALS, 2024, 8 (09):
12345