Determination of the ductile-to-brittle transition temperature of NIOMOL 490 K steel welded joints

被引：1
|
作者：
Maksimovic, Ana [1 ]
Milovic, Ljubica [2 ]
Zecevic, Bojana [1 ]
Aleksic, Vujadin [3 ]
Bekric, Dragoljub [4 ]
机构：
[1] Innovat Ctr Fac Technol & Met, Karnegijeva 4, Belgrade 11120, Serbia
[2] Univ Belgrade, Fac Technol & Met, Karnegijeva 4, Belgrade 11120, Serbia
[3] IMS Inst, Bulevar Vojvode Mis 43, Belgrade 11040, Serbia
[4] Univ Belgrade, Fac Mech Engn, Kraljice Marije 16, Belgrade 11120, Serbia
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2024年 / 131卷
关键词：
Transition temperature; Mechanical properties; NIOMOL; 490K; Nil Ductility Transition Temperature; FRACTURE-TOUGHNESS; CONSTRAINT;
D O I：
10.1016/j.tafmec.2024.104404
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper is dedicated to the ductile -brittle transition behaviour of the microalloyed structural steel NIOMOL 490 K. This steel grade is used for welded pressure vessels subjected to dynamic loads and operating at sub -zero temperatures. Therefore, it must have an acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel was carried out using the Charpy V -notch impact test in the temperature range between -60 degrees C and + 60 degrees C. The notches were located in parent material, heat affected zone and weld metal. In this paper, the tensile strength properties at ambient temperature and the nil ductility temperature in the temperature range from -60 degrees C to + 60 degrees C are presented.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints
    Maksimovic, Ana
    Milovic, Ljubica
    Zecevic, Bojana
    Djordjevic, Branislav
    Bulatovic, Srdjan
    Aleksic, Vujadin
    23 EUROPEAN CONFERENCE ON FRACTURE, ECF23, 2022, 42 : 1361 - 1368
  • [2] Effect of mechanical mismatching on the ductile-to-brittle transition curve of welded joints
    Lezcano, R.
    Rodriguez, C.
    Penuelas, I.
    Betegon, C.
    Belzunce, F. J.
    ENGINEERING FAILURE ANALYSIS, 2009, 16 (08) : 2576 - 2585
  • [3] BRITTLE FRACTURE INITIATION OF STEEL AT THE TEMPERATURE OF THE DUCTILE-TO-BRITTLE TRANSITION REGION (1ST REPORT, CRITERIA FOR DUCTILE-TO-BRITTLE TRANSITION).
    Seo, Kenji
    Nogata, Fumio
    Kusaka, Masahiro
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1987, 53 (489): : 905 - 910
  • [4] Effects of Thermal Aging on Ductile-to-Brittle Transition Temperature Behavior of Welded A516 Steel
    Khattak, M. A.
    Khan, M. A.
    Tamin, M. N.
    FRACTURE AND STRENGTH OF SOLIDS VII, PTS 1 AND 2, 2011, 462-463 : 1379 - +
  • [5] Prediction of Ductile-to-Brittle Transition Under Different Strain Rates in Undermatched Welded Joints
    Mochizuki, Masahito
    Toyoda, Masao
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2011, 133 (03):
  • [6] Prediction of charpy absorbed energy of steel for welded structure in ductile-to-brittle fracture transition temperature range
    Takashima Y.
    Minami F.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2021, 38 (02): : 103S - 107S
  • [7] Ductile-to-Brittle Transition of Steel Due to Dynamic Loading
    Riganti, Gianmario
    Cadoni, Ezio
    METALS, 2024, 14 (07)
  • [8] DUCTILE-TO-BRITTLE TRANSITION IN NIOBIUM
    WESSEL, ET
    LAWTHERS, DD
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1957, 104 (03) : C70 - C70
  • [9] The effect of temperature on the ductile-to-brittle transition in columnar ice
    Qi, S
    Schulson, EM
    ICE IN SURFACE WATERS, VOL 1, 1998, : 521 - 527
  • [10] DUCTILE-TO-BRITTLE TRANSITION IN BONE
    HASSON, DF
    ARMSTRON.RW
    JOURNAL OF MATERIALS SCIENCE, 1974, 9 (07) : 1165 - 1170
12345