EFFECT OF GEOMETRY AND HEAT FLUX ON TURBINE OVER-TIP FLOW POWER EXTRACTION

被引:0
|
作者
Inhestern, Lukas Benjamin [1 ,2 ]
Peitsch, Dieter [2 ]
Paniagual, Guillermo [1 ]
机构
[1] Purdue Univ West Lafayette, W Lafayette, IN 47907 USA
[2] Tech Univ Berlin, Berlin, Germany
来源
PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 13 | 2024年
关键词
Tip Leakage Flow; Heat Transfer; Loss Analysis; NUMERICAL-SIMULATION; LEAKAGE FLOWS; CLEARANCE; EMPHASIS; PHYSICS; BLADE;
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The tip leakage flow is known to be a substantial loss contributor. A precise local loss decomposition of the relevant laminar and turbulent terms for viscous losses and thermal losses is required to predict the impact of tip design modification and revise current design guidelines. While losses due to viscous shear stress cause an irreversible reduction from the theoretical maximum power output, tip leakage vortices also penalize the flow turning. This paper combines a novel method for calculating volume-based loss terms and power extraction with an approach to track the tip leakage flow and to analyze the effect of heat transfer and varying tip gap height. Three different flow topologies were categorized for relative tip gap sizes between 0.23% and 1.10% passage height. The contribution of the tip leakage flow to the overall losses could be quantified at each streamwise location. The prime driver for efficiency improvements with tight clearance is achieved by a reduction in turbulent losses in the tip leakage vortices. Of secondary importance, but ubiquitous for all the tip gaps is the laminar loss, occurring in the overtip region and the main passage. The wall heat flux causes a massive effect on the aerothermal efficiency, the internal heat transfer increases exponentially with increasing wall heat flux.
引用
收藏
页数:14
相关论文
共 50 条
  • [22] Numerical modeling of heat transfer and pressure losses for an uncooled gas turbine blade tip: Effect of tip clearance and tip geometry
    El-Gabry, Lamyaa A.
    PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 4, PTS A AND B, 2007, : 1 - 9
  • [23] Transient state flow and heat transfer performance over the flat tip of HP turbine
    Li J.
    Teng J.
    Lu S.
    Aerospace Systems, 2024, 7 (03) : 525 - 538
  • [24] An investigation of the heat transfer and static pressure on the over-tip casing wall of an axial turbine operating at engine representative flow conditions. (I). Time-mean results
    Thorpe, SJ
    Yoshino, S
    Ainsworth, RW
    Harvey, NW
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2004, 25 (06) : 933 - 944
  • [25] TIP leakage flow and its effect on heat transfer of a sectorial turbine cascade
    Li, Jie
    Chen, Fan
    Zheng, Li
    Yao, Yongqing
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 1996, 17 (04): : 446 - 451
  • [26] EFFECT OF TURBINE INLET TEMPERATURE ON BLADE TIP LEAKAGE FLOW AND HEAT TRANSFER
    Kim, Sung In
    Rahman, Md Hamidur
    Hassan, Ibrahim
    PROCEEDINGS OF ASME TURBO EXPO 2009, VOL 7, PTS A AND B, 2009, : 1773 - 1782
  • [27] Winglet geometry effects on tip leakage loss over the plane tip in a turbine cascade
    Joo Hong Cheon
    Sang Woo Lee
    Journal of Mechanical Science and Technology, 2018, 32 : 1633 - 1642
  • [28] Winglet geometry effects on tip leakage loss over the plane tip in a turbine cascade
    Cheon, Joo Hong
    Lee, Sang Woo
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (04) : 1633 - 1642
  • [29] Effect of blade tip geometry on tip flow and heat transfer for a blade in a low-speed cascade
    Saxena, V
    Nasir, H
    Ekkad, SV
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2004, 126 (01): : 130 - 138
  • [30] Effects of Squealer Geometry of Turbine Blade Tip on the Tip-Leakage Flow and Loss
    ZENG Fei
    ZHANG Weihao
    WANG Yufan
    CAO Xia
    ZOU Zhengping
    Journal of Thermal Science, 2021, 30 (04) : 1376 - 1387