Application of kinetic models to study the sorption rate in the 'ammonium ions-calcined sorbent' system

This study examines sorption kinetics for the extraction of ammonium ions from an aqueous solution under static conditions using 5 g of sorbent. The sorbent was obtained by calcining ash and slag waste accumulated in the ash dump following hydraulic ash removal. The initial concentrations of ammonium ions in the model solutions were 5, 20, 50 and 100 mg/dm 3 . The volume of the model solution was 50 cm 3 . For each initial concentration, the kinetic curves of the ammonium ion sorption at the sorption duration of 10, 30, 60, 90, 120, 150 and 180 min were obtained. The kinetic curves were processed using the Lagergren (pseudo -first order), Ho and McKay (pseudo second order), Morris -Weber (diffusion) and Elovich kinetic equations. It was demonstrated that all kinetic equations adequately describe the experimental data. The linear correlation of the equations was given. The Boyd equation was used to determine the limiting stage in the Morris-Weber model. It was established that the external diffusion mechanism is limiting for the sorption of ammonium ions by a calcined sorbent. The Lagergren model, with a coefficient of determination R 2 of 0.9801-0.9949, best described the experimental data on sorption kinetics. Sorption rate curves as a function of the adsorption value and sorption time were given. The latter are described by exponential and polynomial dependence according to the Lagergren model, polynomial dependence according to the Ho and McKay model and exponential dependence according to the Morris-Weber and Elovich models. The sorption rate was the highest at the initial stage of sorption for all dependencies, which is consistent with previous studies on the sorption of pollutants from aqueous solutions using various sorbents.