High temperature steam oxidation resistance of magnetron sputtered cralsin coatings

被引：0

作者：

Liu H.-Y. ^{[1
,2
]}

Zhu H. ^{[2
]}

Dong Y. ^{[2
]}

Ge F.-F. ^{[2
]}

Huang F. ^{[2
]}

Shu J. ^{[1
]}

机构：

[1] Materials Science and Chemical Engineering, Ningbo University, Ningbo

[2] Engineering Laboratory of Advanced Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo

来源：

Surface Technology | 2021年 / 50卷 / 03期

基金：

中国国家自然科学基金; 国家重点研发计划;

关键词：

Accident tolerance; Cr-based coating; Hardness; High-temperature steam oxidation resistance; Magnetron sputtering; Zr claddings;

D O I：

10.16490/j.cnki.issn.1001-3660.2021.03.033

中图分类号：

学科分类号：

摘要：

To enhance the accident tolerance of zirconium (Zr) alloy claddings, CrAlSi and CrAlSiN coatings were deposited on Zr substrates by magnetron sputtering. The microstructure, mechanical properties, and high temperature steam oxidation resistance of the coatings were characterized. The results showed that the CrAlSi coating exhibited dense columnar crystalline structure, while the CrAlSiN coating exhibited dense structure, with very small grain nearly closer to amorphous. The adhesion between CrAlSiN coating and Zr substrate (~46 N) is higher than that between CrAlSi coating and Zr substrate (~27 N). Both coatings had good mechanical properties and improved high resistance against the high-temperature steam oxidation for the Zr substrate. Their hardness values were about 3 to 4 times that of the Zr substrate. Meanwhile, after the 1 000 ℃ steam oxidation test for 15 minutes, the thickness of Zr(O) layer decreased by 67% for it was coated with a 4.3 µm thick CrAlSi coating, and no oxidation of the Zr substrate occurred after it was coated by a 4.6 µm thick CrAlSiN coating. Furthermore, a 14 µm thick CrAlSiN coating could prevent the Zr substrate from oxidation in the 1 200 ℃ steam more than 60 min. Both CrAlSi and CrAlSiN coatings prepared by magnetron sputtering can effectively inhibit the high temperature steam oxidation of Zr alloy, and the latter has a better protective effect. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.

引用

页码：308 / 314

页数：6

共 27 条

[21] Adamik M., Barna P B., Tomov I., Et al., Columnar structures in polycrystalline thin films developed by competitive growth[J], Thin Solid Films, 317, 1-2, pp. 64-68, (1998)
[22] Kiryukhantsev-Korneev P., Pierson J., Bauer J., Et al., Hard Cr-Al-Si-B-(N) coatings with oxidation resistance up to 1200 ℃[J], Glass Physics & Chemistry, 37, 4, pp. 411-417, (2011)
[23] Chen H W., Chan Y C., Lee J W., Et al., Oxidation resistance of nanocomposite CrAlSiN under long-time heat treatment[J], Surface & Coatings Technology, 206, 7, pp. 1571-1576, (2011)
[24] Liang S T., Zhang H L., Luo M T., Et al., Colour performance investigation of a Cr<sub>2</sub>O<sub>3</sub> green pigment prepared via the thermal decomposition of CrOOH[J], Ceramics International, 40, 3, pp. 4367-4373, (2014)
[25] Liu Z R., Peng B., Xu Y X., Et al., Influence of Ni-addition on mechanical, tribological properties and oxidation resistance of AlCrSiN coatings[J], Ceramics International, 45, 3, pp. 3735-3742, (2019)
[26] Rovere F., Mayrhofer P H., Reinholdt A., Et al., The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings[J], Surface & Coatings Techno-Logy, 202, 24, pp. 5870-5875, (2008)
[27] Kim H G., Kim I H., Jung Y I., Et al., High-temperature oxidation behavior of Cr-coated zirconium alloy[J], Pro-Ceeding of LWR Fuel Performance Meeting/Topfuel, 84, (2013)

← 1 2 3 →