Research progress of carbon fiber sizing agents for thermoplastic composites

被引：0
|
作者：
Zhou D. [1 ]
Gao L. [1 ]
Huo H. [1 ]
Zhang B. [1 ,2 ]
机构：
[1] AVIC Manufacturing Technology Institute Composite Technology Center, Beijing
[2] National Key Laboratory of Science and Technology on Advanced Composites, Beijing
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 08期
关键词：
Composite; Interface property; Sizing agent; Surface treatment; Thermoplastic resin;
D O I：
10.13801/j.cnki.fhclxb.20200507.001
中图分类号：
学科分类号：
摘要：
With the rapid development of thermoplastic composites, traditional sizing agents are no longer able to meet the requirements as its incompatibility with thermoplastic matrices and low heat resistance. In light of this, it is fairly significant to master the technologies of sizing agents suitable for high performance thermoplastic composites. Brief introductions including chief purposes of sizing treatment, strengthening mechanisms at the interfaces between reinforcements and matrices, distinguishing features as well as main requirements of carbon fiber sizing agents for thermoplastic composites were presented in this paper. Researches of novel carbon fiber sizing agents consisting of polyamide, polyurethane, polyaryl ether, polyimide and other constituents for various thermoplastic matrices were reviewed in the order of service temperature. Both modification routes of diverse sizing agents for high performance thermoplastic composites and commercial applications provided by carbon fiber manufacturers were presented with their relative merits and existing drawbacks. Furthermore, their corresponding mechanisms and development status were also clarified. Finally, the future trends of sizing agents for thermoplastic composites were forecasted with relevant suggestions provided subsequently in view of different sizing agents to overcome current problems. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：1785 / 1795
页数：10
相关论文
共 77 条
  • [11] LI P, JI C X, LIU R C, Et al., Study on domestic patent application of carbon fibers sizing, Technology & Economics in Petrochemicals, 34, 1, pp. 55-61, (2018)
  • [12] ZHAO Y Z, LIU F Y, LU J, Et al., Si-Al hybrid effect of waterborne polyurethane hybrid sizing agent for carbon fiber/PA6 composites[J], Fibers and Polymers, 18, 8, pp. 1586-1593, (2017)
  • [13] WANG H, YAN C, XU H B, Et al., Research progress of carbon fiber sizing agent, Thermosetting Resin, 31, 3, pp. 65-69, (2016)
  • [14] HAO R T, ZHANG X J, TIAN Y H., Research progress of heat-resistant thermoplastic sizing agents, Chemical Industry and Engineering Progress, 37, S1, pp. 117-124, (2018)
  • [15] LI J L, GAO X R., Advances in sizing agent for carbon fiber, Fiber Composites, 4, pp. 37-40, (2015)
  • [16] LI S R, HU Z H, HUANG Q Z., Progress in thermoplastic sizing agent for carbon fiber, Fiber Composites, 2, pp. 3-7, (2017)
  • [17] YAO T T, LIU Y T, ZHU H, Et al., Controlling of resin impregnation and interfacial adhesion in carbon fiber/polycarbonate composites by a spray-coating of polymer on carbon fibers, Composites Science and Technology, 182, (2019)
  • [18] YAMAMOTO T, UEMATSU K, IRISAWA T, Et al., A polymer colloidal technique for enhancing bending properties of carbon fiber-reinforced thermoplastics using nylon modifier, Composites Part A: Applied Science and Manufacturing, 112, pp. 250-254, (2018)
  • [19] GAMZE KARSLI N, OZKAN C, AYTAC A, Et al., Characterization of poly(butylene terephthalate) composites prepared by using various types of sized carbon fibers, Materials &Design, 87, pp. 318-323, (2015)
  • [20] XU B, WANG X S, LU Y., Surface modification of polyacrylonitrile-based carbon fiber and its interaction with imide[J], Applied Surface Science, 253, 5, pp. 2695-2701, (2006)
12345678