Dynamic Analysis of Lifting Lug of Equipment Under High Speed EMU

被引：0
|
作者：
Ding, Jie [1 ]
机构：
[1] School of Mechanical Engineering, Hunan University of Arts and Sicence, Changde,415000, China
来源：
Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University | 2024年 / 59卷 / 01期
关键词：
In order to reveal the reasons for the great difference of cracks in the lifting lugs at different positions of the under-chassis equipment of CRH380AL high-speed EMU; full-scale test on vibration acceleration and aerodynamic load are carried out. The dynamics model of the large-scale system with multiple coupling of under-chassis equipment; vehicle; wheel-rail; and railway line is established. The vehicle body and under-chassis equipment are established as elastomer models by finite element method. The wheel-rail subsystem and bogie subsystem are modeled by rigid multibody dynamics. The track irregularity spectrum is based on the measured data samples from Wuhan to Guangzhou. The aerodynamic load under the conditions of tunnel passing and tunnel intersection is numerically simulated by the eight-car aerodynamic model. The influence of elasticity; aerodynamic load; bolt stiffness and other factors of the vehicle body on the lifting lug reaction force of the under-chassis equipment is analyzed. The research shows that; there is a strong coupling behavior between the under-chassis equipment and the vehicle system. The mass distribution of the under-chassis equipment and the elastic coupling effect of the vehicle body lead to the maximum vertical dynamic load of No. 4 lifting lug; which corresponds to the highest proportion of on-site fault cracks. The aerodynamic load has a significant impact on the dynamic load of No. 8 lifting lug of the under-chassis equipment. The dynamic load of the lifting lug in the low-frequency domain increases with the increase of bolt stiffness; the vertical average dynamic load and the maximum dynamic load are 4 times and 6 times of the other two directions respectively. The dynamic analysis method based on the coupling of line and vehicle can provide theoretical support for the design of dynamic mechanical behavior of equipment under the vehicle and the optimization of fatigue performance. © 2024 Science Press. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：168 / 176
相关论文
共 50 条
  • [31] Safety analysis for high speed bogie technologies of CRH3 EMU
    Liang Shulin
    Luo Ren
    Wu Pingbo
    ADVANCED MECHANICAL DESIGN, PTS 1-3, 2012, 479-481 : 797 - +
  • [32] Parametric Finite Element Analysis of the Shipyard Lifting Lug Based on VB and ANSYS Interface
    Lin, Shaofen
    Chen, Qinglin
    Zhu, Zhaoyi
    ENGINEERING SOLUTIONS FOR MANUFACTURING PROCESSES, PTS 1-3, 2013, 655-657 : 264 - 268
  • [33] Study on local dynamic effect and anti-seismic analysis of an annular lifting equipment
    Qu, Shuying
    Wang, Xinjian
    Qu, Naisi
    Yang, Chunqiu
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2002, 38 (11): : 80 - 83
  • [34] Dynamic analysis of prestressed concrete beams under impact and high speed loadings
    Ishikawa, N
    Katsuki, S
    Takemoto, K
    STRUCTURES UNDER SHOCK AND IMPACT VI, 2000, 8 : 247 - 256
  • [35] STRESS-ANALYSIS FOR A LUG UNDER VARIOUS CONDITIONS
    WANG, GS
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1994, 29 (01): : 7 - 16
  • [36] Analysis of the dynamic response of high pier viaducts under high-speed train travel
    Olmos, J. M.
    Astiz, M. A.
    PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS, EURODYN 2011, 2011, : 1438 - 1445
  • [37] Study on the overturning stability of double-deck high-speed EMU under crosswind
    Huang J.
    Yao S.
    Cao Y.
    Wei Y.
    Journal of Railway Science and Engineering, 2023, 20 (04) : 1160 - 1170
  • [38] Vibration and frequency domain characteristics of high speed EMU
    Ren, Zunsong
    Liu, Zhiming
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2013, 49 (16): : 1 - 7
  • [39] Study on Fatigue Strength for Axle of High Speed EMU
    Zhou Pingyu
    Wu Pingbo
    ADVANCED MECHANICAL DESIGN, PTS 1-3, 2012, 479-481 : 965 - +
  • [40] High Speed EMU Modeling Based on the Measured Data
    Yang Shaobing
    Huang Mei
    Wu Mingli
    2009 INTERNATIONAL CONFERENCE ON SUSTAINABLE POWER GENERATION AND SUPPLY, VOLS 1-4, 2009, : 2548 - 2551
12345