A 2D numerical simulation of blade twist effect on the aerodynamic performance of an asymmetric blade vertical axis wind turbine in low wind speed

被引:0
|
作者
Mostafa Mazarbhuiya H.M.S. [1 ]
Biswas A. [1 ]
Sharma K.K. [1 ]
机构
[1] Mechanical Engineering Department, National Institute of Technology, Silchar, Assam
来源
Mostafa Mazarbhuiya, Hussain Mahamed Sahed (mdhussain0309@gmail.com) | 1600年 / European Alliance for Innovation卷 / 07期
关键词
Blade aerodynamics; Blade twist; Built environment; CFD; Low wind speed;
D O I
10.4108/EAI.13-7-2018.162828
中图分类号
学科分类号
摘要
For urban areas, small-scale vertical axis wind turbine (VAWT) is a promising energy harvester due to its compact structure. However, VAWT's performance is inferior in low wind speed of urban environment. Selection of proper design and operational parameters can give a desirable power output under such condition. In this paper, effect of trailing edge blade twist on aerodynamic performance of an asymmetric blade H-Darrieus VAWT at a wind speed (6.0 m/s) is investigated using 2D numerical simulation. Important aerodynamic parameters considering blade twists have been analysed. Although blade twist has not increased power coefficient magnificently, the same is improved with blade twist of 1. However, further increase of the latter reduces the turbine performance. A maximum power coefficient of 0.171 is obtained at tip speed ratio 2.4 for 1 blade twist configuration. Hence, the present study shows that blade twist should be very low for low wind speed application of H-Darrieus VAWT. © 2020 Hussain Mahamed Sahed Mostafa Mazarbhuiya et al., licensed to EAI.
引用
收藏
相关论文
共 50 条
  • [21] Numerical investigations on the effect of blade angles of a vertical axis wind turbine on its performance output
    School of Computing and Engineering, University of Huddersfield, Huddersfield
    HD1 3DH, United Kingdom
    Int. J. COMADEM, 3 (3-10): : 3 - 10
  • [22] Numerical computation and analyses on the blade aerodynamic performance of a horizontal axis wind turbine rotor
    Yang, Congxin
    Tong, Gang
    2011 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2011,
  • [23] SWEPT BLADE FOR PERFORMANCE IMPROVEMENT ON A VERTICAL AXIS WIND TURBINE
    Su, Jie
    Chen, Yaoran
    Zhou, Dai
    Han, Zhaolong
    Bao, Yan
    PROCEEDINGS OF THE ASME 39TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, OMAE2020, VOL 9, 2020,
  • [24] Effect of helical twist angle on the aerodynamic performance and blade dynamic characteristics of floating vertical axis wind turbines
    Deng, Wanru
    Liu, Liqin
    Guo, Ying
    Li, Hao
    MARINE STRUCTURES, 2022, 83
  • [25] EFFECTIVENESS OF BLADE TIP ON LOW SPEED HORIZONTAL AXIS WIND TURBINE PERFORMANCE
    Ariffudin, Muhammad Hafidz
    Zawawi, Fazila Mohd
    Kamar, Haslinda Mohamed
    Kamsah, Nazri
    JURNAL TEKNOLOGI, 2016, 78 (8-4): : 31 - 39
  • [26] Numerical simulation on a straight-bladed vertical axis wind turbine with auxiliary blade
    Li, Y.
    Zheng, Y. F.
    Feng, F.
    He, Q. B.
    Wang, N. X.
    2016 INTERNATIONAL CONFERENCE ON NEW ENERGY AND FUTURE ENERGY SYSTEM (NEFES 2016), 2016, 40
  • [27] NUMERICAL INVESTIGATION OF THE BLADE PROFILE EFFECT ON THE AERODYNAMIC PERFORMANCE OF A VERTICAL-AXIS WIND TURBINE DARRIEUS H-ROTOR
    Boumehani, Abdellah
    Noura, Belkheir
    Kerfah, Rabah
    Khelladi, Sofiane
    Dobrev, Ivan
    JOURNAL OF THERMAL ENGINEERING, 2020, 6 (06): : 388 - 402
  • [28] Effect of blade number on performance of drag type vertical axis wind turbine
    Zheng M.
    Li Y.
    Teng H.
    Hu J.
    Tian Z.
    Zhao Y.
    Applied Solar Energy, 2016, 52 (4) : 315 - 320
  • [29] Numerical and experimental investigation of wind loadings on vertical axis wind turbine blade deflection
    Muzamil, Muhammad
    Siddiqui, Mubashir Ali
    Wu, Jianjun
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2016, 30 (12) : 5555 - 5563
  • [30] Numerical and experimental investigation of wind loadings on vertical axis wind turbine blade deflection
    Muhammad Muzamil
    Mubashir Ali Siddiqui
    Jianjun Wu
    Journal of Mechanical Science and Technology, 2016, 30 : 5555 - 5563