MECHANICAL PROPERTIES OF THE CONCRETE WITH CALCINED ELECTRIC ARC FURNACE OXIDIZING SLAG AS COARSE AGGREGATE AFTER HIGH TEMPERATURE HEATING

被引:0
|
作者
Ito Y. [1 ]
Yokota H. [1 ]
Yokoi S. [2 ]
机构
[1] Nagoya Institute of Technology, Japan
[2] TAISEI CORPORATION, Japan
来源
Journal of Structural and Construction Engineering | 2023年 / 88卷 / 808期
关键词
Calcination; Compressive strength; Concrete; Cracks; Electric arc furnace oxidizing slag; High temperature heating;
D O I
10.3130/aijs.88.872
中图分类号
学科分类号
摘要
When electric arc furnace oxidizing slag gravel (EFG) was used as coarse aggregate, cracks were easily formed after high temperature heating. It is assumed that the transformation of wustite to magnetite by heating caused the volumetric expansion of EFG and the concrete specimens developed cracks. It is assumed that concrete with EFG calcined for volume expansion heating at 500℃ decrease crack. The effect of calcined EFG on mechanical properties after high temperature heating was confirmed. Concrete with EFG calcined at 600°C showed a decrease in cracking of the specimens, and at 1000°C, no cracking was observed. © 2023 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码:872 / 879
页数:7
相关论文
共 50 条
  • [42] Mechanical properties of lithium slag recycled aggregate concrete subject to high temperature
    Liang, Jiongfeng
    Yang, Ying
    Wang, Caisen
    Hu, Ziyi
    Li, Wei
    PLOS ONE, 2025, 20 (02):
  • [43] Assessment of the use of Arcelor Mittal electric arc furnace slag as coarse aggregates in concrete production
    Maharaj, D.
    Mwasha, A.
    CONCRETE REPAIR, REHABILITATION AND RETROFITTING IV, 2016, : 86 - 86
  • [44] Effect of electric arc furnace steel slag on the mechanical and fracture properties of roller-compacted concrete
    Rooholamini, H.
    Sedghi, R.
    Ghobadipour, B.
    Adresi, M.
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 211 : 88 - 98
  • [45] Evaluation of mechanical properties of steel slag as replacement for fine and coarse aggregate in concrete
    Pushpakumara, B. H. J.
    Silva, T. T. D.
    AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING, 2023, 24 (03) : 254 - 263
  • [46] Enhancement of Mechanical Properties and Porosity of Concrete Using Steel Slag Coarse Aggregate
    Miah, Md Jihad
    Patoary, Md Munir Hossain
    Paul, Suvash Chandra
    Babafemi, Adewumi John
    Panda, Biranchi
    MATERIALS, 2020, 13 (12)
  • [47] Self-compacting concrete incorporating electric arc-furnace steelmaking slag as aggregate
    Santamaria, A.
    Orbe, A.
    Losanez, M. M.
    Skaf, M.
    Ortega-Lopez, V.
    Gonzalez, Javier J.
    MATERIALS & DESIGN, 2017, 115 : 179 - 193
  • [48] Durability of high-performance self-compacted concrete using electric arc furnace slag aggregate and cupola slag powder
    Sosa, I
    Thomas, C.
    Polanco, J. A.
    Setien, J.
    Sainz-Aja, J. A.
    Tamayo, P.
    CEMENT & CONCRETE COMPOSITES, 2022, 127
  • [49] Gamma-ray shielding properties of heavyweight concrete with Electric Arc Furnace slag as aggregate: An experimental and numerical study
    Pomaro, Beatrice
    Gramegna, Fabiana
    Cherubini, Roberto
    De Nadal, Viviana
    Salomoni, Valentina
    Faleschini, Flora
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 200 : 188 - 197
  • [50] Properties of concrete containing electric arc furnace steel slag and steel sludge
    Roslan, Nurul Hidayah
    Ismail, Mohammad
    Khalid, Nur Hafizah A.
    Muhammad, Bala
    JOURNAL OF BUILDING ENGINEERING, 2020, 28