Structural size effect in the mode I and mixed mode I/II fracture of strain-hardening cementitious composites (SHCC)

被引：0

作者：

Wang, Qingmin ^{[1
]}

Li, Qinghua ^{[1
]}

Yin, Xing ^{[1
]}

Xu, Shilang ^{[1
]}

机构：

[1] Institute of Advanced Engineering Structures, Zhejiang University, Hangzhou,310058, China

来源：

International Journal of Solids and Structures | 2024年 / 288卷

关键词：

The authors would like to acknowledge the financial support from the National Natural Science Foundation of China under Grant No. 52225803 and No. 52338003;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[31] Flexural Strengthening of Defected RC Slabs Using Strain-Hardening Cementitious Composites (SHCC): An Experimental Work
Fayed, Sabry
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (05) : 3731 - 3742
[32] Flexural strengthening of RC beams using PGFRP bars embedded in strain-hardening cementitious composites (SHCC)
Ellithy, Mohamed
Hassan, Ali
El-Shafiey, Tarek F.
ENGINEERING STRUCTURES, 2024, 317
[33] Flexural Strengthening of Defected RC Slabs Using Strain-Hardening Cementitious Composites (SHCC): An Experimental Work
Sabry Fayed
Arabian Journal for Science and Engineering, 2020, 45 : 3731 - 3742
[34] Improving the Failure Mode of Over-Reinforced Concrete Beams Using Strain-Hardening Cementitious Composites
Atta, Ahmed Mohamed
Khalil, Abd El-Hakim
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES, 2016, 30 (05)
[35] Optimized Fresh and Hardened Properties of Strain-Hardening Cementitious Composites: Effect of Sand Size and Workability
Khan, M. Iqbal
Fares, Galal
Mourad, Shehab
Abbass, Wasim
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2016, 28 (12)
[36] Mixed-mode-I/II fracture of polytetrafluoroethylene
Brown, Eric N.
Rae, Philip J.
Liu, Cheng
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 468 (SPEC. ISS.): : 253 - 258
[37] Fracture toughness of polycrystalline tungsten under mode I and mixed mode I/II loading
Margevicius, RW
Riedle, J
Gumbsch, P
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 270 (02): : 197 - 209
[38] A hybrid approach to determine fracture resistance for mode I and mixed-mode I and II fracture specimens
Qian, X.
Yang, W.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2011, 34 (05) : 305 - 320
[39] Effect of Temperature on the Mixed mode I/II Translaminar Fracture of Epoxy Composites Reinforced with Cotton Fibers
Zeinedini, Afshin
Hasan, Yosra Basim
APPLIED COMPOSITE MATERIALS, 2025, 32 (01) : 281 - 302
[40] Structural Performance and Reinforcement Improvement of Structural Walls Using Strain-Hardening Cementitious Composites
Kim, Hyeong-Ki
Cho, Chang-Geun
Lee, Sun-Ju
Lee, Young Hak
Kim, Taehoon
SUSTAINABILITY, 2021, 13 (07)

← 1 2 3 4 5 →