Thermodynamic evaluation of the aerial and aqueous oxidation of Al - Mg, Al - Si and Al - Mg - Si system alloys at 298 K

被引:0
|
作者
Nikolaychuk, Pavel Anatolyevich [1 ]
Kozeschnik, Ernst [1 ]
机构
[1] Tech Univ Wien, Inst Mat Sci & Technol, Getreidemarkt 9, A-1060 Vienna, Austria
关键词
REGULAR SOLUTION MODEL; STANDARD ELECTRODE-POTENTIALS; EXCESS FREE-ENERGY; ALUMINUM-ALLOYS; PHASE-DIAGRAM; MATHEMATICAL REPRESENTATION; STOICHIOMETRIC PHASES; CHEMICAL-POTENTIALS; STABILITY DIAGRAMS; 100TH ANNIVERSARY;
D O I
10.1038/s41529-024-00446-w
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Aluminum and magnesium are the lightest structural metals, and therefore, various alloys based on them are widely used in both, automotive and aerospace industries. However, aluminum and magnesium are very easily affected by atmospheric and aqueous corrosion, and, therefore, the alloying elements should enhance their corrosion stability. In this work, the thermodynamic analysis of phase and chemical equilibria involving aluminum and magnesium alloys doped with silicon in oxygen-containing air environments, as well as the analysis of chemical and electrochemical equilibria involving these alloys in aqueous environments is conducted. The phase and chemical equiliibria in the Al-Mg, Al-Si, Mg-Si, and Al-Mg-Si systems at 298 K are considered, and the thermodynamic activities of the components of common Al-Mg-Si system alloys are calculated. The invariant chemical equilibria in the systems Al-Mg-O, Al-Si-O, Mg-Si-O at 298 K are considered, the isothermal section of the state diagrams of these systems are plotted, and the oxidation scheme of the Al-Mg-Si system alloys in excess oxygen is proposed. The chemical and electrochemical equilibria in the Al-Mg-Si-H2O system at 298 K are considered and presented in form of the activity - pH and the potential - pH diagrams, and the oxidation of the Al-Mg-Si system alloys in aqueous environments is discussed.
引用
收藏
页数:26
相关论文
共 50 条
  • [31] Properties of dissimilar aluminum joints for Al-Si/Al-Mg, Al-Cu, Al-Mg-Si, Al-Zn-Mg-Cu alloys by electron beam welding
    College of Industrial Technology, Nihon University, Japan
    不详
    Keikinzoku Yosetsu, 2007, 3 (21-29):
  • [32] Precipitation sequence of Al-Mg-Si alloys
    Ikeno, S
    Matsuda, K
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 357 - 362
  • [33] The precipitation sequence in Al-Mg-Si alloys
    Edwards, GA
    Stiller, K
    Dunlop, GL
    Couper, MJ
    ACTA MATERIALIA, 1998, 46 (11) : 3893 - 3904
  • [34] INTERGRANULAR FRACTURE OF AL-MG-SI ALLOYS
    EVENSEN, JD
    RYUM, N
    EMBURY, JD
    MATERIALS SCIENCE AND ENGINEERING, 1975, 18 (02): : 221 - 229
  • [35] ON THE FRACTURE MECHANISMS IN AL-MG-SI-ALLOYS
    SCHWELLINGER, P
    SCRIPTA METALLURGICA, 1980, 14 (07): : 769 - 772
  • [36] KINETICS OF DECOMPOSITION OF AL-MG-SI ALLOYS
    KORNGIEBEL, E
    LOFFLER, H
    OETTEL, W
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1975, 30 (02): : K125 - K127
  • [37] Failure of Al-Mg-Si alloys in bending
    Friedman, P.A.
    Luckey, S.G.
    Journal of Failure Analysis and Prevention, 2002, 2 (01) : 33 - 42
  • [38] DTA STUDIES IN AL-MG-SI ALLOYS
    HAJDU, J
    KERTESZ, L
    LENART, C
    NAGY, E
    CRYSTAL LATTICE DEFECTS, 1974, 5 (3-4): : 177 - 180
  • [39] DILATOMETRIC MEASUREMENT ON AL-MG-SI ALLOYS
    MAJOR, J
    NAGY, E
    TICHY, G
    ACTA PHYSICA ACADEMIAE SCIENTIARUM HUNGARICAE, 1976, 40 (02): : 105 - 109
  • [40] Failure of Al-Mg-Si alloys in bending
    P. A. Friedman
    S. G. Luckey
    Practical Failure Analysis, 2002, 2 (1) : 33 - 42