Experimental Study on Fracture Behavior of Different Kinds of FRP Reinforced Concrete Beam

被引：0
|
作者：
Fan X. [1 ]
Liu J. [1 ]
机构：
[1] State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Nanjing Hydraulic Research Institute, Nanjing
来源：
Jianzhu Cailiao Xuebao/Journal of Building Materials | 2020年 / 23卷 / 05期
关键词：
Crack; Fracture property; FRP reinforced concrete beam; Performance price ratio;
D O I：
10.3969/j.issn.1007-9629.2020.05.014
中图分类号：
学科分类号：
摘要：
In order to study the fracture behavior of FRP reinforced concrete beams with cracks, three-point bending tests of AFRP, CFRP and GFRP reinforced concrete beams with cracks were carried out to analyze the fracture parameters. The conclusions can be drawn that, FRP material has obvious effect on crack resistance and reinforcement of concrete with cracks; the crack initiation load and unstability load of CFRP reinforced concrete beams are higher than those of AFRP or GFRP reinforced concrete beams, and the effect of crack prevention and reinforcement is the best. The failure modes of AFRP reinforced concrete beams and CFRP reinforced concrete beams are both peeling failure of concrete-FRP interface at the bottom of specimens, while the failure mode of GFRP reinforced concrete beams is the tensile failure of GFRP at the bottom of specimens. Through the analysis of the mechanism of crack resistance and reinforcement of different kinds of FRP reinforced concrete beams, it is calculated that the crack initiation toughness and unstability toughness of CFRP reinforced concrete beams are the maximum, and the price of CFRP is moderate, which indicates that the performance price ratio of CFRP reinforced concrete beam with cracks is the best. © 2020, Editorial Department of Journal of Building Materials. All right reserved.
引用
收藏
页码：1093 / 1097and1103
相关论文
共 19 条
  • [11] HUANG L, ZHAO L, YAN L., Flexural performance of RC beams strengthened with polyester FRP composites, International Journal of Civil Engineering, 16, 6, pp. 715-724, (2018)
  • [12] FAN Xiangqian, HU Shaowei, LU Jun, Influence of specimen width on concrete fracture parameters by three-point bending, Shuili Xuebao, 43, pp. 85-90, (2012)
  • [13] FAN Xiangqian, LIU Jueding, HU Shaowei, Et al., Influence of FRP bonding length on fracture parameters of concrete, Journal of Building Materials, 22, 1, pp. 38-44, (2019)
  • [14] FAN Xiangqian, LIU Jueding, Influence of crack-depth ratio on fracture paramenters of FRP reinforced concrete, Journal of Building Materials, 23, 2, pp. 328-333, (2020)
  • [15] PAN Jiazheng, Applications of fracture mechanics to the design of hydraulic structures, Shuili Xuebao, 1, pp. 45-59, (1980)
  • [16] HE X B, YAN B, GU J Y., Crack-arresting and strengthening mechanism of hybrid fiber reinforced polymer sheets in strengthening of reinforced concrete beams, Journal of Engineering Science and Technology Review, 6, 2, pp. 134-138, (2013)
  • [17] HE Xiaobing, GUO Xiaobo, LI Ya, Et al., Strengthening mechanism of concrete beam strengthened with externally bonded interply hybrid GFRP/CFRP, Journal of Huazhong University of Science and Technology(Natural Science Edition), 42, 1, pp. 78-83, (2014)
  • [18] HU S W, ZHANG X F, XU S L., Effects of loading rates on concrete double-K fracture parameters, Engineering Fracture Mechanics, 149, pp. 58-73, (2015)
  • [19] XU S L, REINHARDT H W., A simplified method for determining double-K fracture parameters for three-point bending tests, International Journal of Fracture, 104, 2, pp. 181-209, (2000)
12