Investigation of wear during cryogenic machining of Ti-6Al-4V

被引：0
|
作者：
Gutzeit K. [1 ]
Basten S. [2 ]
Kirsch B. [1 ]
Aurich J.C. [3 ]
机构：
[1] Technische Universität Kaiserslautern, FBK - Lehrstuhl für Fertigungstechnik und Betriebsorganisation, Postfach 3049, Kaiserslautern
来源：
ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb | 2021年 / 116卷 / 09期
关键词：
CO[!sub]2[!/sub]-Cooling; Cryogenic Machining; Milling; Ti-6Al-4V; Tool Wear;
D O I：
10.1515/zwf-2021-0121
中图分类号：
学科分类号：
摘要：
The machining of Ti-6Al-4V is characterized by high temperatures affecting the tool. As a result, the occurring thermal load promotes a pronounced, thermally induced wear. By using a cryogenic coolant, the thermal load can be reduced during machining in order to extend tool life. The results presented in this paper show that cryogenic machining does reduce thermally induced tool wear and thus extends tool life. © 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany.
引用
收藏
页码：599 / 602
页数：3
相关论文
共 50 条
  • [1] The Influence of Cryogenic Coolants in Machining of Ti-6Al-4V
    Jerold, B. Dilip
    Kumar, M. Pradeep
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2013, 135 (03):
  • [2] Friction and cutting forces in cryogenic machining of Ti-6Al-4V
    Hong, SY
    Ding, YH
    Jeong, W
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (15): : 2271 - 2285
  • [3] Tool wear in cryogenic turning of Ti-6Al-4V alloy
    Venugopal, K. A.
    Paul, S.
    Chattopadhyay, A. B.
    CRYOGENICS, 2007, 47 (01) : 12 - 18
  • [4] Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
    Sivalingam, Vinothkumar
    Sun, Jie
    Yang, Bin
    Liu, Kai
    Raju, Ramesh
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 : 188 - 196
  • [5] Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti-6Al-4V alloy
    Sun, Shoujin
    Brandt, Milan
    Palanisamy, Suresh
    Dargusch, Matthew S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 221 : 243 - 254
  • [6] Machining Ti-6Al-4V alloy with cryogenic compressed air cooling
    Sun, S.
    Brandt, M.
    Dargusch, M. S.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (11): : 933 - 942
  • [7] Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy
    Shokrani, Alborz
    Dhokia, Vimal
    Newman, Stephen T.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (10) : 1690 - 1706
  • [8] Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V
    Hong, SY
    Ding, YC
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (10): : 1417 - 1437
  • [9] Wear and surface roughness analysis of machining of Ti-6Al-4V under dry, wet and cryogenic conditions
    Khan, Muhammad Ali
    Jaffery, Syed Husain Imran
    Khan, Mushtaq
    Butt, Shahid Ikramullah
    6TH INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING, 2019, 689
  • [10] Comparative investigation on using cryogenic machining in CNC milling of Ti-6Al-4V titanium alloy
    Shokrani, Alborz
    Dhokia, Vimal
    Newman, Stephen T.
    MACHINING SCIENCE AND TECHNOLOGY, 2016, 20 (03) : 475 - 494
12345