Effect of post-weld heat treatment on mechanical properties and fatigue crack growth behaviour of friction stir welded 7075-T651 Al alloy

被引：14
|
作者：
Joshi A. [1 ]
Gope A. [2 ]
Chandra Gope P. [1 ]
机构：
[1] Department of Mechanical Engineering, College of Technology, G B Pant University of Agriculture and Technology
[2] Department of Mechanical Engineering, College of Engineering and Technology, Odisha, Bhubaneswar
来源：
Theoretical and Applied Fracture Mechanics | 2023年 / 123卷
关键词：
7075-T651; Friction stir weld; Mechanical properties; Crack Growth; Overload; Post heat treatment;
D O I：
10.1016/j.tafmec.2022.103714
中图分类号：
学科分类号：
摘要：
The effect of post weld heat-treatments (PWHT) on the mechanical and fatigue crack growth of friction stir welded 7075-T651 aluminum alloy was investigated. The PWHT of natural aging (NA), artificial aging at 190 °C for 24 h (HT1), and 423 °C for 12 h (HT2) resulted in significant improvement in the mechanical properties of the welded joint as compared to the base metal. The highest improvement in mechanical strength is seen in HT1 post heat treatment followed by NA and HT2 post heat treatments. The ductility of welded joint for PWHT at 190 °C with a soaking period of 24 h is about 70 % of the base metal. Crack growth tests at constant amplitude loading (CAL) and single tensile overload (OL) with an overload ratio of 1.8 were conducted at a stress ratio of 0.1. A difference in the crack growth rates after application of overload is seen in all PWHT conditions. Different heat treatments did not change the growth behaviour in base metal in both the loading cases. However, a slight difference in crack growth rates is observed due to the application of overload. The crack growth acceleration followed by delayed retardation is observed due to the application of overload. The post weld heat treatment enhances the retardation effect due to tensile overload and the degree of enhancement depends on the PWHT. © 2022 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [41] Effects of post-weld heat treatment on microstructure and mechanical properties of friction stir welded joints of 2219-O aluminium alloy
    Feng, JC
    Chen, YC
    Liu, HJ
    MATERIALS SCIENCE AND TECHNOLOGY, 2006, 22 (01) : 86 - 90
  • [42] Effect of post-weld heat treatments on microstructure and mechanical properties of friction welded alloy 718 joints
    Damodaram, R.
    Raman, S. Ganesh Sundara
    Rao, K. Prasad
    MATERIALS & DESIGN, 2014, 53 : 954 - 961
  • [43] Effect of post weld heat treatment on mechanical properties of friction stir welded joints for 2219-T6 aluminum alloy
    School of Power and Mechanical Engineering, Wuhan University, Wuhan, China
    不详
    Cailiao Rechuli Xuebao, 3 (35-39):
  • [44] Microstructural evolution and mechanical properties of the friction stir welded Al-Cu dissimilar joint enhanced by post-weld heat treatment
    Cao, Fujun
    Li, Junping
    Hou, Wentao
    Shen, Yifu
    Ni, Ruiyang
    MATERIALS CHARACTERIZATION, 2021, 174
  • [45] Effect of friction stir welding and post-weld heat treatment on a nanostructured ferritic alloy
    Mazumder, B.
    Yu, X.
    Edmondson, P. D.
    Parish, C. M.
    Miller, M. K.
    Meyer, H. M., III
    Feng, Z.
    JOURNAL OF NUCLEAR MATERIALS, 2016, 469 : 200 - 208
  • [46] Effect of post heat treatment on fatigue behaviour of friction stir spot welded Al-Mg-Si alloy
    Pacific Industrial Co., Ltd., Japan
    不详
    Yosetsu Gakkai Ronbunshu, 2008, 1 (7-14):
  • [47] Effect of post-weld natural aging on mechanical and microstructural properties of friction stir welded 6063-T4 aluminium alloy
    Imam, Murshid
    Racherla, Vikranth
    Biswas, Kajal
    MATERIALS & DESIGN, 2014, 64 : 675 - 686
  • [48] The effect of post-weld heat treatment on the formability of aluminum to steel friction stir welded blanks
    Muhamad Zulkhairi Rizlan
    Ahmad Baharuddin Abdullah
    Zuhailawati Hussain
    International Journal of Material Forming, 2025, 18 (2)
  • [49] Improved properties of friction stir-welded AZ31 magnesium alloy by post-weld heat treatment
    Wang, G.
    Yan, Z.
    Zhang, H.
    Zhang, X.
    Liu, F.
    Wang, X.
    Su, Y.
    MATERIALS SCIENCE AND TECHNOLOGY, 2017, 33 (07) : 854 - 863
  • [50] Effect of cyclic solution treatment on microstructure and mechanical properties of friction stir welded 7075 Al alloy
    Bayazid, S. M.
    Farhangi, H.
    Asgharzadeh, H.
    Radan, L.
    Ghahramani, A.
    Mirhaji, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 649 : 293 - 300
12345