Dual-parameter combined measurement sensor based on tri-metal structure

Simultaneous measurement of strain and temperature in vibrating environments has always been a key technical issue in the field of structural health monitoring. To address the bottleneck of inadequate dual-parameter measurement performance in existing Fiber Bragg Grating (FBG) strain and temperature sensors, a new type of fiber optic grating sensor with anti-vibration capabilities for the measurement of both strain and temperature is proposed. The sensor utilizes a flexible hinge structure made of 304 steel with high elastic modulus for strain sensitization and a bimetallic structure composed of 7075 aluminum and 4 J36 Invar alloy for temperature sensitization, integrating both types of sensors. Theoretical analysis of the sensor was conducted, followed by the fabrication of a prototype and the establishment of a testing system for performance evaluation. The results show that the designed dual-parameter FBG sensor has a strain sensitivity of approximately 3.06 pm/mu epsilon, about 2.62 times that of a bare FBG, and a temperature sensitivity of about 50.2 pm/degrees C, roughly 4.97 times that of a bare FBG. In anti-vibration performance tests between 5-100 Hz, the wavelength drift of the strain and temperature sections of the FBG in the sensor were both within 1 pm, meeting the requirements for simultaneous measurement of strain and temperature in vibrating environments. These findings provide a reference for the development of similar sensors and further improvement of the measurement performance of FBG strain and temperature sensors.