Numerical investigation to optimize the modified cavity receiver for enhancement of thermal performance of solar parabolic dish collector system

The concentrated parabolic dish collector (PDC) systems are widely utilized for the purpose of generating high-temperature heat by receiving and converting solar energy efficiently into thermal energy. Cavity receivers including spiral coils have a common use in PDC system for optimal thermal performance. Therefore, to enhance the thermal performance of a PDC system, the present study investigates different cavity receiver configurations, such as cylinder and conical shaped receivers with flat and spherical absorber surface as well as the effect of spiral coil arrangement. To identify the most optimal spirally coiled cavity receiver, the comparison is conducted based on outlet temperature, heat exchange rate, thermal efficiency, effectiveness, and thermal performance capability (TPC). The investigations were conducted using the ANSYS Fluent CFD simulation software package. The SolTrace software package was utilized to compute the maximum heat flux incident on the absorber surface of the receiver, and peak heat flux data was used as input parameter at the absorber surface of the receiver. Furthermore, to select the suitable working fluid in PDC system, different heat transfer fluids, such as Syltherm 800, Xceltherm 600, ParathermHR™ and water, respectively were studied. From the thermal analysis of various proposed receiver geometries, the receiver with conical shape and spherical absorber surface is more efficient over other configurations. It provides 50 % higher heat transfer rate thancylindrical receiver with flat absorber surface. Moreover, receiver's thermal performance could modestly be improved by modifying the spiral coil pitch (variable pitch). In terms of pumping power consumption, readily availability, low viscosity, and high specific heat, water is suggested as working fluid for receiver of PDC system. © 2023 Elsevier Ltd