Reliability assessment of pressure vessel design methods

被引：0

作者：

Li H. ^{[1
]}

Yang P. ^{[1
]}

Huang X. ^{[2
]}

Yang H. ^{[1
]}

机构：

[1] Faculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou

[2] Southeast University, Nanjing

来源：

International Journal of Reliability and Safety | 2019年 / 13卷 / 1-2期

基金：

中国国家自然科学基金;

关键词：

LIMIT; Limit-load analysis method; Pressure vessel; Reliability; SCM; Stress categorisation method;

D O I：

10.1504/IJRS.2019.097014

中图分类号：

学科分类号：

摘要：

Several pressure vessel design methods based on elastic analysis and elastic-plastic analysis are available to designers. This paper proposes a reliability analysis method to assess three pressure vessel design methods: Stress Categorisation Method (SCM), Limit-Load Analysis (LIMIT) in ASME code and DBA-L method which was recently proposed by present authors. It was concluded that with the same input variables into the three analyses, the responses of calculated results of three method were different, which provided an effective guidance to assess and choose the proper design method in engineering practice. Copyright © 2019 Inderscience Enterprises Ltd.

引用

页码：31 / 43

页数：12

共 50 条

[21] Utilization of modern test methods and analyses for pressure vessel and piping gasket design
Daugherty, Rita J.
Burkhart, Nancy J.
Bolin, Lonnie K.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 3: DESIGN AND ANALYSIS, 2007, : 17 - 24
[22] SAFETY IN PRESSURE VESSEL DESIGN
MCFARLAND, I
CHEMICAL ENGINEERING PROGRESS, 1970, 66 (06) : 56 - +
[23] SIMPLIFIED ANALYSIS OF PRESSURE-VESSEL RELIABILITY
LIDIARD, AB
WILLIAMS, M
JOURNAL OF THE BRITISH NUCLEAR ENERGY SOCIETY, 1977, 16 (03): : 207 - 223
[24] Reliability-based load and resistance factor design of composite pressure vessel under external hydrostatic pressure
Cai, Baoping
Liu, Yonghong
Liu, Zengkai
Tian, Xiaojie
Ji, Renjie
Li, Hang
COMPOSITE STRUCTURES, 2011, 93 (11) : 2844 - 2852
[25] Quality Assessment of Used Materials for Pressure Vessel Design of Stirling Engine Prototype
Praunseis, Zdravko
Seme, Sebastijan
2017 INTERNATIONAL CONFERENCE ON MODERN ELECTRICAL AND ENERGY SYSTEMS (MEES), 2017, : 28 - 31
[26] Application of short reliability methods for risk reduction assessment of a pressurized vessel in offshore production facilities
Melo-González, R
Ovalle-Turrubiartes, J
Garciá-León, AM
López-Ledesma, J
RISK ANALYSIS, 1998, 2 : 297 - 306
[27] ASSESSMENT OF FLASH VESSEL DESIGN
BRYANT, D
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 1984, 198 (05) : 89 - 96
[28] Methods of Vessel Casualty Process Assessment
Soliwoda, J.
TRANSNAV-INTERNATIONAL JOURNAL ON MARINE NAVIGATION AND SAFETY OF SEA TRANSPORTATION, 2014, 8 (02) : 211 - 216
[29] Fatigue analysis in pressure vessel design by local strain approach: Methods and software requirements
Kalnins, A
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2006, 128 (01): : 2 - 7
[30] RELIABILITY ASSESSMENT AND SCREENING BY RELIABILITY INDICATOR METHODS
MOLTOFT, J
ELECTROCOMPONENT SCIENCE AND TECHNOLOGY, 1983, 11 (01): : 71 - 84

← 1 2 3 4 5 →