Design Method for Vehicle Body Joints Based on Load-Bearing Characteristics of Thin Plates

被引：0
|
作者：
Wang C. [1 ]
Yu W. [2 ]
Cheng A. [1 ]
He Z. [1 ]
机构：
[1] Hunan University, State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Changsha
[2] Liuzhou Vocational & Technical College, Liuzhou
来源：
Qiche Gongcheng/Automotive Engineering | 2023年 / 45卷 / 11期
关键词：
load-bearing characteristics; sensitivity analysis; thin plate; universal joint structure;
D O I：
10.19562/j.chinasae.qcgc.2023.11.019
中图分类号：
学科分类号：
摘要：
As a key structure of the Body-in-White（BIW），a reasonable joint design is of great signifi⁃ cance for the improvement of the load-bearing capacity of the BIW. Taking the lower joint of the B pillar as the re⁃ search object，a universal structure design method for body joints based on the load-bearing characteristics of thin plates is proposed in this paper. Firstly，the load type，force transmission mode and load-bearing characteristics of the thin plate structure are described to provide a theoretical basis for the subsequent universal joint structure. Sec⁃ ondly，the load conditions of joints are identified through sensitivity analysis，which is used to analyze the load-bearing characteristics of the thin plate of the joint. Then the design rules for the thin plate of T-joints are estab⁃ lished and the universal structure design of the joint is summarized. Application examples and tests show that the joint stiffness and BIW torsional stiffness is increased by 35% and 8.5% respectively，while the weight is only in⁃ creased by 0.16%. The method can quickly and effectively improve joint structure design and enhance body stiffness. © 2023 SAE-China. All rights reserved.
引用
收藏
页码：2175 / 2185
页数：10
相关论文
共 22 条
  • [21] MALLICK P K., Materials，design and manufacturing for light⁃ weight vehicles［M］, (2020)
  • [22] DUAN Y L, BI C X., Study on weight-reduction of car-body based on stiffness and modal sensitivity analysis［J］, Noise and Vi⁃ bration Control, 30, 6, pp. 79-81, (2010)
123