Effect of the wavy geometric disturbance on the flow over elliptic cylinders with different aspect ratios

被引:0
|
作者
Nam, Seok Hyun [1 ]
Yoon, Hyun Sik [1 ]
机构
[1] Department of Naval Architecture and Ocean Engineering, Pusan National University, 2, Busandaehak-ro 63 beon-gil, Gumjeong-Gu, Busan,46241, Korea, Republic of
基金
新加坡国家研究基金会;
关键词
Bifurcation (mathematics) - Flow control - Cylinders (shapes) - Reynolds number;
D O I
暂无
中图分类号
学科分类号
摘要
The present study investigates the effect of the wavy geometric disturbance as the flow control on the flow around elliptic cylinders with different aspect ratios at low Reynolds number of 100. The wide ranges of the wavelength (1.0≤λ/Lm,x≤8.0) and the aspect ratio of the ellipse (0.5≤AR≤1.0) are considered, where Lm,x is the streamwise mean body length. For AR=1.0 with the circular cross-section, the flow strongly depends on λ/Lm,x, resulting in the appearance of various flow structures. As AR decreases, the flow bifurcation occurs at the certain conditions of AR and λ/Lm,x. Therefore, the bifurcation map is presented in AR−λ/Lm,x plane, where flows are classified as three modes of the unsteady, steady and coexistence states. There are two effects of the waviness and the streamlined body on the flow bifurcation. At the large ARs in AR>0.6, the bifurcation early occurs from the long wavelengths, which is associated to two types of the streamwise vorticities. In AR≤0.6, the effect of the streamlined body on the flow overcomes the wavy geometric disturbance, resulting in undergoing the bifurcation, regardless of λ/Lm,x. Additionally, force coefficients and the Strouhal number are analyzed to understand the dependence of hydrodynamic performance and vortex shedding on AR and λ/Lm,x. © 2021 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [21] Large Eddy Simulation of Flow over Wavy Cylinders with Different Twisted Angles at a Subcritical Reynolds Number
    Guo, Chunyu
    Guo, Hang
    Hu, Jian
    Song, Kewei
    Zhang, Weipeng
    Wang, Wei
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2019, 7 (07)
  • [22] Double wavy geometric disturbance to the bluff body flow at a subcritical Reynolds number
    Yoon, Hyun Sik
    Oh, Kyung Jin
    Kim, Hyo Ju
    Kim, Min Il
    Moon, Jahoon
    OCEAN ENGINEERING, 2020, 195
  • [23] Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method
    Ul Islam, S.
    Zhou, C. Y.
    Shah, A.
    Xie, P.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (04) : 1027 - 1041
  • [24] Numerical study of a laminar melt flow driven by a rotating magnetic field in enclosed cylinders with different aspect ratios
    Nikrityuk, P. A.
    Eckert, K.
    Grundmann, R.
    ACTA MECHANICA, 2006, 186 (1-4) : 17 - 35
  • [25] Numerical study of a laminar melt flow driven by a rotating magnetic field in enclosed cylinders with different aspect ratios
    P. A. Nikrityuk
    K. Eckert
    R. Grundmann
    Acta Mechanica, 2006, 186 : 17 - 35
  • [26] Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method
    S. Ul Islam
    C. Y. Zhou
    A. Shah
    P. Xie
    Journal of Mechanical Science and Technology, 2012, 26 : 1027 - 1041
  • [27] Numerical investigation of flow field over four cylinders in square arrangement for different spacing ratios
    Goutam, P.
    Reddy, D. Siva Krishna
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [28] The vortex-induced vibration of an elliptic cylinder with different aspect ratios
    Wang, Jie
    Zhou, Bo
    Yao, Zongkai
    Yu, Jiawei
    Wu, Zhifei
    Zhang, Guiyong
    OCEAN ENGINEERING, 2022, 248
  • [29] Aspect ratio effect on shock-accelerated elliptic gas cylinders
    Zou, Liyong
    Liao, Shenfei
    Liu, Cangli
    Wang, Yanping
    Zhai, Zhigang
    PHYSICS OF FLUIDS, 2016, 28 (03)
  • [30] FLOW OVER 2 CYLINDERS OF DIFFERENT DIAMETERS - THE LOCK-IN EFFECT
    SAYERS, AT
    SABAN, A
    JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1994, 51 (01) : 43 - 54