STRENGTH DEVELOPMENT OF 300 N/MM2 CLASS ULTRA-HIGH STRENGTH GROUT DURING HEAT CONTROLLED CURING WITH ELEVATED TEMPERATURES

被引：0
|
作者：
Honma D. [1 ,2 ]
Kojima M. [2 ]
Nishiwaki T. [3 ,4 ]
Mihashi H. [4 ]
机构：
[1] Construction Material Engineering Group, Construction Technology Research Department, R & D Institute, Takenaka Co.
[2] Construction Technology Research Department, R & D Institute, Takenaka Co.
[3] Dept. of Architecture and Building Science, Graduate School of Engineering, Tohoku Univ.
来源：
Journal of Structural and Construction Engineering | 2023年 / 88卷 / 810期
关键词：
Compressivestrength; Effectiveage; Poresizedistribution; Ultrahighstrengthconcrete; Ultrahighstrengthgrout; XRD;
D O I：
10.3130/aijs.88.1230
中图分类号：
O6 [化学]; TQ03 [化学反应过程]; TQ02 [化工过程（物理过程及物理化学过程）];
学科分类号：
0703 ; 081701 ; 081704 ;
摘要：
The strength development of 300N/mm2 class ultra-high strength grout by heat-controlled curing was investigated. The strength development at 80-180 ℃ becomes higher than that at a constant temperature of 5-35 ℃, and can be expressed by an effective age based on the same manner. This is because the reactions of C2S, C3A, and C4AF are promoted, and the capillary pores are reduced by heat-controlled curing. Furthermore, it was clarified that heat-controlled curing with a heatingwire system and/or surfaceheatingelements achievedthe samestrength level as that byheat-controlledcuring under sealedconditions due tosimilarwater content. © 2023 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码：1230 / 1239
页数：9
相关论文
共 50 条
  • [41] Development and Production of Weldable High-Strength Steels with a Yield Point in the Range from 600 to 950 N/mm2
    V. V. Geier
    T. N. Popova
    V. N. Nikitin
    S. I. Kiselev
    Metallurgist, 2005, 49 : 230 - 235
  • [42] Very high early strength of ultra-high performance concrete containing nanoscale pozzolans using the microwave heat curing method
    Korpa, A.
    Trettin, R.
    ADVANCES IN CEMENT RESEARCH, 2008, 20 (04) : 175 - 184
  • [43] DEVELOPMENT OF HOT-ROLLED HIGH STRENGTH STEEL SHEETS FOR FORMABILITY WITH 50 AND 60 kg/mm2 IN TENSILE STRENGTH.
    Kawakami, Koichi
    Hase, Noboru
    Sugisawa, Seichi
    Toyota, Yuji
    Arai, Tetsuzo
    Sumitomo Metals, 1974, 26 (02): : 10 - 17
  • [44] STUDY OF TOUGHNESS OF WELDED JOINT OF 80 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL FOR LOW-TEMPERATURE SERVICE .3. DEVELOPMENT OF HEAVY SECTION 80 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL WITH HIGH TOUGHNESS OF WELDED JOINT
    CHIBA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S611 - S611
  • [45] DEVELOPMENT OF 210-KGF/MM2 GRADE HIGH-STRENGTH GALVANIZING WIRE FOR ACSR
    YAMAOKA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S662 - S662
  • [46] ON BEHAVIOR OF PRECIPITATES IN NB-MO HEAT-TREATED HIGH STRENGTH STEEL HAVING 80 KG/MM2 TENSILE STRENGTH
    KANAZAWA, S
    NAKASHIMA, A
    OKAMOTO, K
    TANABE, K
    NAKAZAWA, S
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1967, 8 (02): : 113 - +
  • [47] OPTIMIZATION OF MICROSTRUCTURE AND PULLOUT BEHAVIOR OF FIBERS IN ULTRA-HIGH STRENGTH CONCRETE WITH THE HELP OF NANO-PARTICLES AND HEAT CURING
    Wu, Zemei
    Shi, Caijun
    Khayat, K. H.
    Zhu, Deju
    1ST INTERNATIONAL CONFERENCE ON UHPC MATERIALS AND STRUCTURES, 2016, 105 : 479 - 491
  • [48] Influence of blended powders on properties of Ultra-High Strength Fibre Reinforced Self Compacting Concrete subjected to elevated temperatures
    Saif, Mohamed S.
    Shanour, Ali S.
    Abdelaziz, Gamal E.
    Elsayad, Hanaa I.
    Shaaban, Ibrahim G.
    Tayeh, Bassam A.
    Hammad, Mahmoud S.
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 18
  • [49] TENSILE-STRENGTH OF 80-KGF/MM2 GRADE STEEL FOR HIGH HEAT INPUT WELDING
    SUGA, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1385 - 1385
  • [50] Development of anti-oxidation Ag salt paste for large-area (35 x 35 mm2) Cu-Cu bonding with ultra-high bonding strength
    Zhang, Bowen
    Chen, Chuantong
    Sekiguchi, Takuya
    Liu, Yang
    Li, Caifu
    Suganuma, Katsuaki
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 113 : 261 - 270
12345