Mechanical Properties of Unalloyed Titanium Processed by Selective Laser Melting and Rotary Swaging

被引：0
|
作者：
Gryaznov, M. Yu. [1 ]
Shotin, S. V. [1 ]
Chuvildeev, V. N. [1 ]
Sysoev, A. N. [1 ]
Kotkov, D. N. [1 ]
Piskunov, A. V. [1 ]
Sakharov, N. V. [1 ]
Semenycheva, A. V. [1 ]
Murashov, A. A. [1 ]
机构：
[1] Lobachevsky State Univ Nizhny Novgorod, Nizhnii Novgorod 603022, Russia
来源：
INORGANIC MATERIALS-APPLIED RESEARCH | 2024年 / 15卷 / 02期
基金：
俄罗斯科学基金会;
关键词：
additive technology; selective laser melting; rotary swaging; mechanical properties; microhardness; nanohardness; materials for implants; COMMERCIALLY PURE TITANIUM; ALZHEIMERS-DISEASE; STRENGTH; DUCTILITY;
D O I：
10.1134/S2075113324020217
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Samples of unalloyed titanium VT1-0 with high strength characteristics (ultimate tensile strength of 820 MPa), which exceed the values for this material manufactured using conventional technologies, are produced by selective laser melting. To solve the problem of replacement of titanium alloys with commercially pure titanium in medical applications, unalloyed titanium VT1-0 with record mechanical characteristics (ultimate tensile strength of 1350 MPa) is processed by selective laser melting and rotary swaging. This value exceeds the characteristics of the high-strength Ti-6% Al-4% V alloy. The finely dispersed martensite formed as a result of high crystallization rates under the optimal mode of selective laser melting is the reason for the strength characteristics increase of unalloyed titanium VT1-0.
引用
收藏
页码：328 / 335
页数：8
相关论文
共 50 条
  • [21] Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
    Attar, Hooyar
    Boenisch, Matthias
    Calin, Mariana
    Zhang, Lai-Chang
    Scudino, Sergio
    Eckert, Juergen
    ACTA MATERIALIA, 2014, 76 : 13 - 22
  • [22] Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
    Sing, Swee Leong
    Yeong, Wai Yee
    Wiria, Florencia Edith
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 660 : 461 - 470
  • [23] Selective laser melting of titanium alloys: Effect of processing parameters on microstructure and mechanical properties
    Kushwaha A.
    Kumar S.A.
    Velu R.
    International Journal of Mechatronics and Manufacturing Systems, 2021, 14 (02) : 128 - 142
  • [24] High Cycle Fatigue Behaviour of 316L Stainless Steel Produced via Selective Laser Melting Method and Post Processed by Hot Rotary Swaging
    Opela, Petr
    Benc, Marek
    Kolomy, Stepan
    Jakubek, Zdenek
    Beranova, Denisa
    MATERIALS, 2023, 16 (09)
  • [25] Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
    Zhang, Dongyun
    Feng, Zhe
    Wang, Chengjie
    Wang, Weidong
    Liu, Zhen
    Niu, Wen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 724 : 357 - 367
  • [26] Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
    Chlebus, E.
    Gruber, K.
    Kuznicka, B.
    Kurzac, J.
    Kurzynowski, T.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 639 : 647 - 655
  • [27] Mechanical and Physical Properties of AlSi10Mg Processed through Selective Laser Melting
    Raus, A. A.
    Wahab, M. S.
    Ibrahim, M.
    Kamarudin, K.
    Ahmed, Aqeel
    Shamsudin, S.
    7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16), 2017, 1831
  • [28] Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting
    Croteau, Joseph R.
    Griffiths, Seth
    Rossell, Marta D.
    Leinenbach, Christian
    Kenel, Christoph
    Jansen, Vincent
    Seidman, David N.
    Dunand, David C.
    Vo, Nhon Q.
    ACTA MATERIALIA, 2018, 153 : 35 - 44
  • [29] Microstructure and mechanical properties of 304L stainless steel processed by selective laser melting
    Tong X.
    Zhang Y.-J.
    Huang Y.-S.
    Hu Z.-Z.
    Wang Q.
    Zhang Z.-H.
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2019, 49 (05): : 1615 - 1621
  • [30] Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
    Ma, Pan
    Prashanth, Konda G.
    Scudino, Sergio
    Jia, Yandong
    Wang, Hongwei
    Zou, Chunming
    Wei, Zunjie
    Eckert, Juergen
    METALS, 2014, 4 (01): : 28 - 36
12345