Review on the Application of Microreactor in the Synthesis Processes of Energetic Materials

被引：0
|
作者：
Zhou L. [1 ]
Yang W. [2 ]
Lü Y.-C. [1 ]
机构：
[1] State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing
[2] Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang
来源：
Hanneng Cailiao/Chinese Journal of Energetic Materials | 2024年 / 32卷 / 03期
基金：
中国国家自然科学基金;
关键词：
energetic material; microfluidic technology; microreactor; process intensification; strong exothermic reaction;
D O I：
10.11943/CJEM2023267
中图分类号：
学科分类号：
摘要：
Nowadays，the conventional batch preparation process is difficult to achieve accurate control of process parameters，product structure and properties due to the macro scale，resulting in poor product uniformity and significant safety risk in the preparation process. Therefore，how to achieve safe，controllable，and efficient preparation of energetic materials has become a popular research topic. Microreactors are well‐suited for preparing energetic materials due to their advantages of miniaturization，integration，high safety，and excellent mass and heat transfer efficiencies. Consequently，microreactor technology has gradually attracted the wide attention of researchers and emerged in the preparation of energetic materials.. This paper provides a detailed overview of the domestic and international research progress on the application of microreactors in hazardous chemical synthesis processes and the preparation of energetic materials. Special attention is given to the potential application of microreactors in the preparation of monolithic and composite energetic materials. The future research direction was prospected，and the future development needs of microreactor technology were emphasized，including large‐scale production，three wastes treatment and intelligent platform construction. © 2024 Institute of Chemical Materials, China Academy of Engineering Physics. All rights reserved.
引用
收藏
页码：325 / 344
页数：19
相关论文
共 88 条
  • [31] FROST C G，, MUTTON L., Heterogeneous catalytic synthesis using microreactor technology［J］, Green Chemistry, 12, 10, pp. 1687-1703, (2010)
  • [32] LUISI R., Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis［J］, Beilstein Journal of Organic Chemistry, 13, pp. 520-542, (2017)
  • [33] TANG Y，GAO Y，YU C，, Et al., Experimental study of the dielectric properties of energy‐containing materials at variable temperatures［J］, Review of Scientific Instruments, 94, 3, (2023)
  • [34] HANG J，TAO D., Estimation of two component activities of binary liquid alloys by the pair potential energy containing a polynomial of the partial radial distribution function［J］, Met‑ als, 13, 10, (2023)
  • [35] REINHOUDT D N，, VAN DEN BERG A., On‐microchip multiphase chemistry—a review of microreactor design principles and reagent contacting modes［J］, Tetrahedron, 61, 11, pp. 2733-2742, (2005)
  • [36] LI Y，, Et al., Simulation of internal defects in TKX‐50 crystals［J］, Materials, 16, 11, (2023)
  • [37] ZHOU S, Et al., Catalytic pyrolysis of 5‐Ami-no‐1H‐Tetrazole with copper and its oxide：A deep insight into the combustion mechanism for high nitrogen compound ［J］, Fuel, (2023)
  • [38] ZHARKOV M N, ZLOTIN S G., Continuous nitration of alcohols in a Freon flow［J］, Reaction Chemistry & Engineering, 4, 7, pp. 1303-1308, (2019)
  • [39] LIU L, NI Z., Droplet‐based microreactor for the production of micro/nano‐materials ［J］, Electrophoresis, 41, 10-11, pp. 833-851, (2020)
  • [40] SRIVASTAVA V C., Microfluidic‐based photocatalytic microreactor for environmental application：A review of fabrication substrates and techniques，and operating parameters ［J］, Photochemical & Photobiological Sciences, 15, 6, pp. 714-730, (2016)
123456789