The flexural behavior and efficiency of RC beams strengthened with SNSM bars under the effect of several end conditions and material properties

被引:1
|
作者
Mohamed, Sara S. [1 ,2 ]
Hamdy, Osman [3 ]
Seleem, M. H. [1 ]
Sharaky, I. A. [4 ]
机构
[1] Zagazig Univ, Fac Engn, Mat Engn Dept, Zagazig 44519, Egypt
[2] Minist Water Resources & Irrigat, The New Adm Capital City, Egypt
[3] Zagazig Higher Inst Engn & Technol, Civil Engn Dept, Zagazig, Egypt
[4] Taif Univ, Coll Engn, Civil Engn Dept, POB 11099, Taif 21944, Saudi Arabia
关键词
Reinforced concrete; SNSM strengthening; GFRP bars; End anchorage; CFRP wrapping; NSM GFRP BARS; NEAR-SURFACE; CONCRETE; REINFORCEMENT; PERFORMANCE; BOTTOM; BOND;
D O I
10.1016/j.engstruct.2024.117990
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this paper, twelve strengthened, and one un-strengthened reinforced concrete (RC) beams were experimentally and numerically investigated in flexure. The strengthened RC beams were upgraded with steel or glass fiber reinforced polymer (GFRP) in the form of side-near surface mounted (SNSM) reinforcement. The tested parameters were the SNSM bar diameter, adhesive materials, SNSM end conditions, and materials of strengthening bars. The three-dimensional elastic-plastic finite element program (ABAQUS) was utilized to simulate numerically the tested beams in the experimental program. Finally, a parametric study was numerically conducted to show the effect of different parameters of the SNSM technique on the flexural response of the strengthened beams. The experimental findings demonstrated that the RC beams strengthened with SNSM steel bars generally had higher load capacity than those strengthened with GFRP. Bent ends of the SNSM steel bars were more efficient than in SNSM GFRP bars or end anchorage by GFRP sheets. The load-carrying capacity enhancement for strengthened beams with SNSM steel bars (10 and 12 mm in diameter) having end anchorage (wrapped by CFRP sheets) was 212.6% and 234.7% compared to the unstrengthened beam. In contrast, the enhancement decreased from 184.5 to 145% and 160.5 to 158.3% as the bond material changed from epoxy to grout for the beams strengthened by 10 mm and 12 mm diameters of SNSM steel bars, respectively. The numerical and experimental findings were in close agreement.
引用
收藏
页数:24
相关论文
共 50 条
  • [41] Effect of fatigue loading on flexural performance of NSM CFRP-strengthened RC beams under different service temperatures
    Jahani, Younes
    Baena, Marta
    Barris, Cristina
    Torres, Lluis
    Sena-Cruz, Jose
    ENGINEERING STRUCTURES, 2022, 273
  • [42] Effect of rubberized concrete integrating uncoated and coated crumb rubber on the flexural behavior of the RC beams reinforced with steel and GFRP bars
    Ahmed, Sayed
    Sharaky, I. A.
    El Sayed, Sara
    Hassan, Hilal
    Abdo, Ayman
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 426
  • [43] Flexural Behavior of Full-Scale Damaged Hollow RC Beams Strengthened with Prestressed SCFRP Plate under Four-Point Bending
    Li, Baojun
    Zeng, Lingkai
    Guo, Xinyan
    Wang, Yilin
    Deng, Zhiheng
    POLYMERS, 2022, 14 (14)
  • [44] Flexural behavior and microstructural material properties of sandwich foam core under arctic temperature conditions
    Aowad, Mikayla
    Banik, Arnob
    Zhang, Chao
    Kaiser, Isaiah
    Khan, Mahfujul Haque
    Almeida, Ana Clecia Alves
    Lazarenko, Daria
    Khabaz, Fardin
    Tan, Kwek-Tze
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2023, 26 (02) : 205 - 224
  • [45] Numerical Investigation of Flexural Behavior of Reinforced Concrete (RC) T-Beams Strengthened with Pre-Stressed Iron-Based (FeMnSiCrNi) Shape Memory Alloy Bars
    Khalil, Ahmed
    Elkafrawy, Mohamed
    Hawileh, Rami
    AlHamaydeh, Mohammad
    Abuzaid, Wael
    JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (06):
  • [46] Experimental study on shear behavior of RC T-beams strengthened with near-surface mounted BFRP bars considering effect of secondary loading
    Zhang H.
    Sun C.
    Huang Y.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2019, 40 (06): : 56 - 63
  • [47] Effect of shear span-to-effective depth ratio and FRP material type on the behaviour of RC T-beams strengthened in shear with embedded FRP bars
    Dirar, Samir
    Sogut, Kagan
    Caro, Manjola
    Rahman, Ridwan
    Theofanous, Marios
    Faramarzi, Asaad
    ENGINEERING STRUCTURES, 2025, 332
  • [48] Effect of cross-section size on the flexural failure behavior of RC cantilever beams under low cyclic and monotonic lateral loadings
    Jin, Liu
    Yu, Wenxuan
    Su, Xiao
    Zhang, Shuai
    Du, Xiuli
    Han, Junyan
    Li, Dong
    ENGINEERING STRUCTURES, 2018, 156 : 567 - 586
  • [49] Effect of steel-polypropylene hybrid fiber on the flexural behavior of RC beams under cryogenic freeze-thaw cycles and repeated loading
    Li, Yang
    Zheng, Zikang
    Zhang, Yinggang
    Li, Biao
    Fan, Xiaoping
    ENGINEERING FAILURE ANALYSIS, 2025, 170
  • [50] The effect of mechanical properties of masonry on the behavior of FRP-strengthened masonry-infilled RC frame under cyclic load
    Batikha, M.
    Alkam, F.
    COMPOSITE STRUCTURES, 2015, 134 : 513 - 522