Structure and Properties of thin Hard Coating Tialn layers Deposited by pvd on Heated Substrate wc/co

被引:0
|
作者
El-Awadi, G. A. [1 ]
Abdel-Samad, S. [1 ]
Waheed, A. F. [1 ]
机构
[1] Atom Energy Author, Nucl Res Ctr, Dept Nucl Phys, Cyclotron Project, Cairo, Egypt
来源
关键词
TiAlN; PVD; hardness; scratch test; XRD; impact test;
D O I
暂无
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
TiAlN coatings have been widely used for cutting tools, especially for dry and high speed machining. The properties of the layers deposited by PVD (Physical Vapor Deposition) are affected by many parameters of deposition conditions. These include percentage and type of reactive gas, vacuum pressure, time of deposition, type of target materials, power of deposition, and temperature of substrate. In this work, the properties of TiAlN layers deposited on elevated substrate temperature at 480 degrees C at different ratios of nitrogen reactive gas with working pressure 10(-2) mbar were studied. The layers were investigated by scratch test, collate measurements, hardness measurements, impact test, Tribometer pin on disc and Optical microscopy.
引用
收藏
页码:138 / 144
页数:7
相关论文
共 50 条
  • [31] Study on the deposition and tribological properties of diamond/DLC composite coating on WC-Co substrate
    Shen, Bin
    Wang, Liang
    Chen, Sulin
    Sun, Fanghong
    International Journal of Abrasive Technology, 2013, 6 (01) : 58 - 69
  • [32] Corrosion resistance appraisal of TiN, TiCN and TiAlN coatings deposited by CAE-PVD method on WC-Co cutting tools exposed to artificial sea water
    Matei, A. A.
    Pencea, I.
    Branzei, M.
    Tranca, D. E.
    Tepes, G.
    Sfat, C. E.
    Ciovica , E.
    Gherghilescu, A. I.
    Stanciu, G. A.
    APPLIED SURFACE SCIENCE, 2015, 358 : 572 - 578
  • [33] Effect of Ta diffusion layer on the adhesion properties of diamond coating on WC-Co substrate
    Ma, Dan-dan
    Xue, Yan-peng
    Gao, Jie
    Ma, Yong
    Yu, Sheng-wang
    Wang, Yong-sheng
    Xue, Chen
    Hei, Hong-jun
    Tang, Bin
    APPLIED SURFACE SCIENCE, 2020, 527
  • [34] Adhesion properties of a silicon-containing calcium phosphate coating deposited by RF magnetron sputtering on a heated substrate
    Surmeneva M.A.
    Surmenev R.A.
    Pichugin V.F.
    Koval' N.N.
    Teresov A.D.
    Ivanova A.A.
    Grubova I.Y.
    Ignatov V.P.
    Primak O.
    Epple M.
    Surmeneva, M. A., 1600, Izdatel'stvo Nauka (07): : 944 - 951
  • [35] Influence of localized cyclic substrate plastification on residual stress, load stress and cracking near the interface between hard coating and WC-Co hard metal substrate
    Kluensner, T.
    Krobath, M.
    Ecker, W.
    Marsoner, S.
    Morstein, M.
    Marklein, B.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 82 (113-120): : 113 - 120
  • [36] Effect of Mo content on the structure and mechanical properties of TiAlMoN films deposited on WC-Co cemented carbide substrate by magnetron sputtering
    Yang, Ke
    Xian, Guang
    Zhao, Haibo
    Fan, Hongyuan
    Wang, Jun
    Wang, Hui
    Du, Hao
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 52 : 29 - 35
  • [37] Structure and mechanical properties of WC interlayers between iron substrate and thin tungsten plate
    Cai, Xiaolong
    Guo, Lei
    Cao, Baowei
    Li, Xin
    Liu, Mingxin
    Xu, Yunhua
    VACUUM, 2021, 194
  • [38] Electric properties of organic thin-layers deposited by photo-polymerization on a textile substrate
    Bahners, Thomas
    Wego, Andreas
    Gutmann, Jochen S.
    PROGRESS IN ORGANIC COATINGS, 2013, 76 (11) : 1581 - 1585
  • [39] Investigation of Thermal Properties of thin Semiconductor Layers Deposited on a Glass Substrate by the Photothermal Deflection Technique
    Gaied, Imen
    Ben Rabeh, Mohamed
    Rabhi, Adel
    Kanzari, Mounir
    Yacoubi, Noureddine
    DIFFUSION IN SOLIDS AND LIQUIDS V, PTS 1 AND 2, 2010, 297-301 : 537 - +
  • [40] Rapid sintering of ultra fine WC and WC-Co hard materials by high-frequency induction heated sintering and their mechanical properties
    Kim, Hwan-Cheol
    Shon, In-Jin
    Jeong, In-Kyoon
    Ko, In-Yong
    Yoon, Jin-Kook
    Doh, Jung-Mann
    METALS AND MATERIALS INTERNATIONAL, 2007, 13 (01) : 39 - 45