FORCE DISTRIBUTION FOR A FLAT BELT DRIVE WITH A CONCENTRATED CONTACT LOAD

被引：4
|
作者：
KIM, HS [1 ]
MARSHEK, KM [1 ]
机构：
[1] UNIV TEXAS,DEPT MECH ENGN,AUSTIN,TX 78712
来源：
MECHANISM AND MACHINE THEORY | 1990年 / 25卷 / 06期
关键词：
D O I：
10.1016/0094-114X(90)90009-9
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
An equation based on the classical Euler formula is derived to investigate the normal and tangential belt force distribution of a flat belt drive when a concentrated contact load is applied on the pulley. This loading condition occurs in an abrasive belt grinding. The belt force equation presented in this paper has a constant coefficient of friction. Analytical results show good agreement with the experimental results and the authors' previous work, which is based on a surface model of the belt friction face with a varying coefficient of friction. The equation developed from the Euler formula is suggested for practical design due to its sufficient accuracy and simplicity. © 1990.
引用
收藏
页码：667 / 677
页数：11
相关论文
共 50 条
  • [31] STRESS DISTRIBUTION IN CROSS-CUT OF A FLAT BELT
    GOSS, E
    MASCHINENBAUTECHNIK, 1974, 23 (11): : 489 - 491
  • [32] The influence of instrumental parameters on the adhesion force in a flat-on-flat contact geometry
    Colak, Arzu
    Wormeester, Herbert
    Zandvliet, Harold J. W.
    Poelsema, Bene
    APPLIED SURFACE SCIENCE, 2014, 308 : 106 - 112
  • [33] Support Force and Load Distribution Analysis of Angular Contact Ball Bearing Considering Rotor Deformation
    Chen, Shijin
    Zou, Dongliang
    Chen, Xiaoyang
    Wang, Yakun
    Cai, Dongming
    TRIBOLOGY ONLINE, 2023, 18 (04) : 125 - 135
  • [34] The contact pressure distribution in flat rolling of wire
    Carlsson, B
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 73 (1-3) : 1 - 6
  • [35] Contact Force Decomposition Using Contact Pressure Distribution
    Kim, Hyoungkyun
    Choi, Seungmoon
    Chung, Wan Kyun
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2017, 2 (01): : 290 - 297
  • [36] Abstract Model of a Belt Conveyor as a Dynamic Load of an Electric Drive..
    Roubicek, Ota
    Elektrotechnicky obzor, 1983, 72 (01): : 17 - 25
  • [37] Mathematical Representation of a Conveyor Belt as a Dynamic Load of an Electric Drive.
    Roubicek, Ota
    Elektrotechnicky obzor, 1983, 72 (5-6): : 297 - 305
  • [38] CONTACT FORCE DISTRIBUTION IN GRANULAR MEDIA
    SIDOROFF, F
    CAMBOU, B
    MAHBOUBI, A
    MECHANICS OF MATERIALS, 1993, 16 (1-2) : 83 - 89
  • [39] NON-UNIFORMITY OF CIRCUMFERENTIAL FORCE DISTRIBUTION IN THE BELTS OF MULTI-STRAND V-BELT DRIVE.
    Pronin, B.A.
    Samoshkin, S.L.
    Russian Engineering Journal (English translation of Vestnik Mashinostroeniya), 1976, 56 (10): : 13 - 16
  • [40] Increasing tractive force realized by a drive on base of a infinitely closed belt
    Tarasov, Yu.D.
    Izvestiya Vysshikh Uchebnykh Zavedenii, Gornyi Zhurnal, 1992, (01):
12345