Surface Characteristics of Oxide Film Prepared on CP Ti and Ti-10Ta-10Nb Alloy by Anodizing

被引：3
|
作者：
Kim, Hyun-Seung [1 ]
Kee, Kwang-Min [1 ]
Lee, Doh-Jae [1 ]
Park, Sang-Won [2 ]
Lee, Kyung-Ku [3 ]
机构：
[1] Chonnam Natl Univ, Res Inst Funct Surface, Sch Mat Sci & Engn, Gwangju, South Korea
[2] Chonnam Natl Univ, Coll Dent, Dept Prosthodont, Gwangju, South Korea
[3] R&D Ctr Titanium & Special Alloys, Gwangju, South Korea
来源：
KOREAN JOURNAL OF MATERIALS RESEARCH | 2007年 / 17卷 / 01期
关键词：
Anodizing; Titanium oxide; Ti-10Ta-10Nb alloy; Nanotube;
D O I：
10.3740/MRSK.2007.17.1.006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, we investigated the formation of self-organized nanostructure oxide layers on CP Ti and Ti-10Ta-10Nb alloy in an electrolyte of 1 M phosphoric acid and 1.5 wt% Hydrofluoric acid. The morphology of oxide film on substrate was observed using scanning electron microscopy and transmission electron microscopy. The surface roughness of titanium oxide film was analyzed by atomic force microscopy and the crystalline of specimen was investigated using X-ray diffractometer. The results of this study showed that well-aligned titanium oxide nanotubes are formed with diameter of approx. 100 nm and length of approx. 500 nm with CP Ti. However, it is clear that TiTaNb alloy highly irregular structure with various diameters. Transmission electron microscope investigations show that the specimens were confirmed as amorphous. Such titanium oxide nanotubes are expected a well-adhered bioacitive surface layer on titanium substrate for orthopedics and dental implants.
引用
收藏
页码：6 / 10
页数：5
相关论文
共 50 条
  • [31] Structural and dielectric properties of anodic oxide film on Nb-Ti alloy
    Semboshi, Satoshi
    Bando, Ko-ichi
    Ohtsu, Naofumi
    Shim, Yonggu
    Konno, Toyohiko J.
    THIN SOLID FILMS, 2008, 516 (23) : 8613 - 8619
  • [32] In vitro fatigue behavior of surface oxidized Ti35Zr10Nb biomedical alloy
    Leoni, A.
    Apachitei, I.
    Riemslag, A. C.
    Fratila-Apachitei, L. E.
    Duszczyk, J.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2011, 31 (08): : 1779 - 1783
  • [33] Native oxidation resistance of Al20Nb30Ta10Ti30Zr10 refractory complex concentrated alloy (RCCA)
    Butler, T. M.
    Chaput, K. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 787 : 606 - 617
  • [34] Characterization of the Ti-10Nb-10Zr-5Ta Alloy for Biomedical Applications. Part 2: Wettability, Tribological Performance and Biocompatibility
    V. Braic
    M. Balaceanu
    M. Braic
    C. Vitelaru
    I. Titorencu
    V. Pruna
    A. C. Parau
    C. Fanara
    A. Vladescu
    Journal of Materials Engineering and Performance, 2014, 23 : 326 - 332
  • [35] Characterization of the Ti-10Nb-10Zr-5Ta Alloy for Biomedical Applications. Part 2: Wettability, Tribological Performance and Biocompatibility
    Braic, V.
    Balaceanu, M.
    Braic, M.
    Vitelaru, C.
    Titorencu, I.
    Pruna, V.
    Parau, A. C.
    Fanara, C.
    Vladescu, A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (01) : 326 - 332
  • [36] Thermal studies for preparation of Nb10Hf1Ti Alloy
    Pamela Alex
    Jugal Kishor
    I. G. Sharma
    Journal of Thermal Analysis and Calorimetry, 2013, 112 : 45 - 50
  • [37] Effects of texture on the superplasticity of Ti-25Al-10Nb alloy
    Wu, YT
    Koo, CH
    INTERMETALLICS, 1997, 5 (01) : 29 - 36
  • [38] Thermal studies for preparation of Nb10Hf1Ti Alloy
    Alex, Pamela
    Kishor, Jugal
    Sharma, I. G.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2013, 112 (01) : 45 - 50
  • [39] Direct electrochemical preparation of Nb-10Hf-1Ti alloy
    Abdelkader, Amr M.
    Fray, Derek J.
    ELECTROCHIMICA ACTA, 2010, 55 (08) : 2924 - 2931
  • [40] Characterization of passive oxide film on a Ti-5%Ta-1.8%Nb alloy on exposure to severe oxidizing conditions
    Mythili, R.
    Saroja, S.
    Vijayalakshmi, M.
    MATERIALS CHARACTERIZATION, 2010, 61 (12) : 1326 - 1334
12345