CRYOGENIC MATERIAL PROPERTIES OF STAINLESS-STEEL TUBE-TO-FLANGE WELDS

被引：1
|
作者：
SIEWERT, TA
MCCOWAN, CN
VIGLIOTTI, DP
机构：
[1] Fracture and Deformation Division, NIST, Boulder
来源：
CRYOGENICS | 1990年 / 30卷 / 04期
关键词：
materials characterization; mechanical properties; steel;
D O I：
10.1016/0011-2275(90)90316-5
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The mechanical properties of stainless steel tube-to-flange welds for a cryogenic piping application were measured. A planar specimen was developed to duplicate the constraint, loading and heat-sink properties of the circular joint, while reducing preparation time and cost. Specimens were evaluated containing welds between the tube material (21 Cr-6Ni-9Mn) and the three stainless steels being considered for the flange materials: type 304L, type 316L and 21 Cr-6Ni-9Mn. The mechanical property tests consisted of three phases: simple tensile testing to failure, tensile testing of notched specimens (where the notch simulated fabrication flaws) and fatigue testing of notched specimens for the 4 × 104 cycle design life of the structure. The type 316L stainless steel flange produced welds with the best combination of strength and ductility at 295 and 4 K in all three phases of testing. © 1990.
引用
收藏
页码：356 / 364
页数：9
相关论文
共 50 条
  • [31] PHOSPHORUS AND SULFUR PARTITIONING IN AUSTENITIC STAINLESS-STEEL WELDS
    BROOKS, JA
    WILLIAMS, JC
    THOMPSON, AW
    JOURNAL OF METALS, 1981, 33 (09): : A4 - A4
  • [32] CORROSION-RESISTANCE OF FERRITIC STAINLESS-STEEL WELDS
    YAMAUCHI, I
    SAKAMOTO, T
    ZAIZEN, T
    TAKAHASHI, A
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (08) : B298 - B298
  • [33] EFFECTS OF FERRITE CONTENT IN AUSTENITIC STAINLESS-STEEL WELDS
    HAUSER, D
    VANECHO, JA
    WELDING JOURNAL, 1982, 61 (02) : S37 - S44
  • [34] MATERIAL PROPERTIES OF AUSTENITIC STAINLESS-STEEL AT LOW-TEMPERATURE
    KOTETSU, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1368 - 1368
  • [35] SEALING TECHNIQUE FOR ALUMINUM TO STAINLESS-STEEL CF FLANGE PAIRS
    ISHIGAKI, T
    SHIBUYA, K
    SAKAUE, H
    BE, SH
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1994, 12 (04): : 1705 - 1708
  • [36] Variation of Mechanical Properties and Corrosion Properties with Mo Contents of Hyper Duplex Stainless-Steel Welds
    Kim, No-hoon
    Gil, Woong
    Lim, Heui-dae
    Choi, Chang-hyeon
    Lee, Hae-woo
    METALS AND MATERIALS INTERNATIONAL, 2019, 25 (01) : 193 - 206
  • [37] Variation of Mechanical Properties and Corrosion Properties with Mo Contents of Hyper Duplex Stainless-Steel Welds
    No-hoon Kim
    Woong Gil
    Heui-dae Lim
    Chang-hyeon Choi
    Hae-woo Lee
    Metals and Materials International, 2019, 25 : 193 - 206
  • [38] FERRITIC STAINLESS-STEEL - A COINAGE MATERIAL
    SARDANA, VP
    PIKLE, DA
    BULLETIN OF MATERIALS SCIENCE, 1989, 12 (3-4) : 263 - 270
  • [39] GRANULATE OF STAINLESS-STEEL AS COMPENSATOR MATERIAL
    VANSANTVOORT, JPC
    BINNEKAMP, D
    HEIJMEN, BJM
    LEVENDAG, PC
    RADIOTHERAPY AND ONCOLOGY, 1995, 34 (01) : 78 - 80
  • [40] STAINLESS-STEEL SOLVES MATERIAL PROBLEM
    DYKE, DL
    METAL PROGRESS, 1974, 106 (05): : 163 - &
12345