CRYOGENIC MATERIAL PROPERTIES OF STAINLESS-STEEL TUBE-TO-FLANGE WELDS

被引：1
|
作者：
SIEWERT, TA
MCCOWAN, CN
VIGLIOTTI, DP
机构：
[1] Fracture and Deformation Division, NIST, Boulder
来源：
CRYOGENICS | 1990年 / 30卷 / 04期
关键词：
materials characterization; mechanical properties; steel;
D O I：
10.1016/0011-2275(90)90316-5
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The mechanical properties of stainless steel tube-to-flange welds for a cryogenic piping application were measured. A planar specimen was developed to duplicate the constraint, loading and heat-sink properties of the circular joint, while reducing preparation time and cost. Specimens were evaluated containing welds between the tube material (21 Cr-6Ni-9Mn) and the three stainless steels being considered for the flange materials: type 304L, type 316L and 21 Cr-6Ni-9Mn. The mechanical property tests consisted of three phases: simple tensile testing to failure, tensile testing of notched specimens (where the notch simulated fabrication flaws) and fatigue testing of notched specimens for the 4 × 104 cycle design life of the structure. The type 316L stainless steel flange produced welds with the best combination of strength and ductility at 295 and 4 K in all three phases of testing. © 1990.
引用
收藏
页码：356 / 364
页数：9
相关论文
共 50 条
  • [1] MANGANESE AND NITROGEN IN STAINLESS-STEEL SMA WELDS FOR CRYOGENIC SERVICE
    MCCOWAN, CN
    SIEWERT, TA
    REED, RP
    LAKE, FB
    WELDING JOURNAL, 1987, 66 (03) : S84 - S92
  • [2] AN EVALUATION OF STAINLESS-STEEL FILLER MATERIAL FOR CRYOGENIC APPLICATIONS
    JUHAS, MC
    DALDER, ENC
    JOURNAL OF METALS, 1982, 35 (12): : A63 - A64
  • [3] DUCTILITY AND TOUGHNESS OF STAINLESS-STEEL WELDS
    SAWHILL, JM
    BOND, AP
    WELDING JOURNAL, 1976, 55 (02) : S33 - S41
  • [4] TESTING WELDS IN STAINLESS-STEEL TUBING
    不详
    CONTROL AND INSTRUMENTATION, 1980, 12 (01): : 15 - 15
  • [5] ZINC EMBRITTLEMENT OF STAINLESS-STEEL WELDS
    JOHNSON, JM
    BERRY, MR
    GUTZEIT, J
    JOURNAL OF METALS, 1982, 34 (08): : 51 - 51
  • [6] HOW STAINLESS-STEEL WELDS CORRODE
    GARNER, A
    METAL PROGRESS, 1985, 127 (05): : 31 - &
  • [7] CRYOGENIC MECHANICAL-PROPERTIES OF AN AGED AUSTENITIC STAINLESS-STEEL
    SHIMADA, M
    FUSION ENGINEERING AND DESIGN, 1993, 20 : 437 - 443
  • [8] MECHANICAL-PROPERTIES OF STAINLESS-STEEL CASTINGS AT CRYOGENIC TEMPERATURES
    OGATA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1404 - 1404
  • [9] POOL SHAPES IN GTA WELDS ON STAINLESS-STEEL
    MALLORY, LC
    KERR, HW
    WECKMAN, DC
    CIM BULLETIN, 1986, 79 (890): : 74 - 74
  • [10] TESTING OF STAINLESS-STEEL WELDS FOR VARIOUS APPLICATIONS
    ROGNE, T
    DRUGLI, JM
    VALEN, S
    CORROSION, 1992, 48 (10) : 864 - 870
12345