IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625

被引：2

作者：

Hajnys, Jiri ^{[1
]}

Zlamal, Tomas ^{[1
]}

Petru, Jana ^{[1
]}

Pagac, Marek ^{[1
]}

Rudawska, Anna ^{[2
]}

机构：

[1] VSB Tech Univ Ostrava, Fac Mech Engn, 17 Listopadu 2172-15 1, Ostrava 70800, Czech Republic

[2] Lublin Univ Technol, Fac Mech Engn, Nadbystrzycka 36, PL-20618 Lublin, Poland

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2016年 / 10卷 / 32期

关键词：

nickel Alloy 625; cutting geometry; cutting force;

D O I：

10.12913/22998624/65111

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The article is focussed on comparing and determining the impact of the cutting geometry of the cutting tool due to dynamic load on system and microgeometry machined surface. For longitudinal turning nickel alloy Alloy 625 (W. Nr. 2.4856) rounded indexable cutting insert was used (RCMT 10T3M0 - F2) and its equivalent squared indexable cutting insert (SNMG 120412 - MR3) coated with fine-grained PVD (Ti, Al) N + TiN. Experimental testing of nickel Alloy 625 was under predetermined cutting conditions. In the selected depth of the removed material of 0.5 mm and 1.5 mm was measured in the course of machining the size of the individual components of cutting forces.

引用

页码：24 / 31

页数：8

共 50 条

[21] Machining nickel - iron alloy using tungsten cutting tool and its process parameter optimization using Adam - Gene genetic algorithm
Nadeem, Mohammed
Jani, S. P.
Reddy, Kunduru Rakesh
Kumar, P. Senthil
Gupta, Manish
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (05): : 3305 - 3312
[22] Force load of cutting tool by turning of nickel alloy Inconel 718 with sintered carbide insert
Mrkvica, Ivan
Konderla, Ryszard
Jurko, Jozef
Panda, Anton
Neslusan, Miroslav
ADVANCED MATERIALS DESIGN AND MECHANICS II, 2013, 372 : 441 - +
[23] The geometry of grooving tool and its influence on dynamic load system for turning
Zlamal, Tomas
Malotova, Sarka
Szotkowski, Tomas
Cep, Robert
Marinescu, Ioan D.
13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019), 2019, 40 : 602 - 609
[24] Effects of dynamic characteristics of high-speed machine tool/cutting tool system on machining quality
Zhang, S.
Ai, X.
Zhao, J.
Liu, J. G.
ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 656 - 660
[25] Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
Habeeb, H. H.
Abou-El-Hossein, K. A.
Mohammad, B.
Kadirgama, K.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 201 (1-3) : 483 - 485
[26] Tool path generation and simulation of dynamic cutting process for five-axis NC machining
Ding Han
Bi QingZhen
Zhu LiMin
Xiong YouLun
CHINESE SCIENCE BULLETIN, 2010, 55 (30): : 3408 - 3418
[27] Tool path generation and simulation of dynamic cutting process for five-axis NC machining
DING HanBI QingZhenZHU LiMin XIONG YouLun State Key Laboratory of Digital Manufacturing Equipment and TechnologyHuazhong University of Science and TechnologyWuhan China State Key Laboratory of Mechanical System and VibrationShanghai Jiao Tong UniversityShanghai China
Chinese Science Bulletin, 2010, 55 (30) : 3408 - 3418
[28] The Influence of Tool Geometry towards Cutting Performance in Machining Aluminium 7075
Syafik, Jumali Muhammad
Razali, Muhamad Mohd
Azwan, Sundi Syahrul
ENGINEERING TECHNOLOGY INTERNATIONAL CONFERENCE 2016 (ETIC 2016), 2017, 97
[29] EFFECT OF WIPER CUTTING TOOL GEOMETRY ON MACHINING OF DUCTILE CAST IRON
Zeyveli, Metin
Karamusaoglu, Halil Ahmet
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI, 2011, 29 (04): : 358 - 366
[30] Effects of machining parameters and tool geometry on serrated chip formation, specific forces and energies in orthogonal cutting of nickel-based super alloy Inconel 100
Ozel, Tugrul
Ulutan, Durul
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (07) : 673 - 686

← 1 2 3 4 5 →