IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625

被引：2
|
作者：
Hajnys, Jiri [1 ]
Zlamal, Tomas [1 ]
Petru, Jana [1 ]
Pagac, Marek [1 ]
Rudawska, Anna [2 ]
机构：
[1] VSB Tech Univ Ostrava, Fac Mech Engn, 17 Listopadu 2172-15 1, Ostrava 70800, Czech Republic
[2] Lublin Univ Technol, Fac Mech Engn, Nadbystrzycka 36, PL-20618 Lublin, Poland
来源：
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2016年 / 10卷 / 32期
关键词：
nickel Alloy 625; cutting geometry; cutting force;
D O I：
10.12913/22998624/65111
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article is focussed on comparing and determining the impact of the cutting geometry of the cutting tool due to dynamic load on system and microgeometry machined surface. For longitudinal turning nickel alloy Alloy 625 (W. Nr. 2.4856) rounded indexable cutting insert was used (RCMT 10T3M0 - F2) and its equivalent squared indexable cutting insert (SNMG 120412 - MR3) coated with fine-grained PVD (Ti, Al) N + TiN. Experimental testing of nickel Alloy 625 was under predetermined cutting conditions. In the selected depth of the removed material of 0.5 mm and 1.5 mm was measured in the course of machining the size of the individual components of cutting forces.
引用
收藏
页码：24 / 31
页数：8
相关论文
共 50 条
  • [1] Process Damping and Cutting Tool Geometry in Machining
    Taylor, C. M.
    Sims, N. D.
    Turner, S.
    TRENDS IN AEROSPACE MANUFACTURING 2009 INTERNATIONAL CONFERENCE, 2011, 26
  • [2] EFFECT OF THE CUTTING TOOL GEOMETRY ON THE TOOL WEAR RESISTANCE WHEN MACHINING INCONEL 625
    Zlamal, Tomas
    Hajnys, Jiri
    Petru, Jana
    Mrkvica, Ivan
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2018, 12 (01): : 236 - 243
  • [3] MACHINING OF NICKEL ALLOY BY CUTTING TOOL WITH PREPARED CUTTING EDGE PREPARATION
    Zlamal, Tomas
    Malotova, Sarka
    Szotkowski, Tomas
    Vortel, Ondrej
    Trefil, Antonin
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 1761 - 1767
  • [4] Optimization of cutting tool geometry and machining parameters in turning process
    Saravanamurugan, S.
    Sundar, B. Shyam
    Pranav, R. Sibi
    Shanmugasundaram, A.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 3351 - 3357
  • [5] Effect of cutting conditions and tool geometry on process damping in machining
    Tunc, L. T.
    Budak, E.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2012, 57 : 10 - 19
  • [6] Effects of irregular tool geometry and machining process parameters on the wavelength performance of process damping in machining titanium alloy at low cutting speed
    Yusoff, Ahmad Razlan (razlan@ump.edu.my), 1600, Springer London (85): : 5 - 8
  • [7] Effects of irregular tool geometry and machining process parameters on the wavelength performance of process damping in machining titanium alloy at low cutting speed
    Muhammad Adib Shaharun
    Ahmad Razlan Yusoff
    The International Journal of Advanced Manufacturing Technology, 2016, 85 : 1019 - 1033
  • [8] Effects of irregular tool geometry and machining process parameters on the wavelength performance of process damping in machining titanium alloy at low cutting speed
    Shaharun, Muhammad Adib
    Yusoff, Ahmad Razlan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (5-8): : 1019 - 1033
  • [9] EFFECT OF CUTTING TOOL MICROGEOMETRY ON THE ALUMINIUM ALLOY MACHINING PROCESS
    Zlamal, Tomas
    Mrkvica, Ivan
    Malotov, Sarka
    Vortel, Ondrej
    Vopat, Tomas
    MM SCIENCE JOURNAL, 2019, 2019 : 2915 - 2919
  • [10] Tool Wear Mechanisms during Machining of Alloy 625
    Fusova, Lenka
    Rokicki, Pawel
    Spotz, Zdenek
    Saksl, Karel
    Siemers, Carsten
    STRUCTURAL INTEGRITY AND FAILURE, 2011, 275 : 204 - +
12345