CEMENTITE PARTICLE COARSENING DURING SPHEROIDIZATION OF BEARING STEEL SAE-52100

被引：0
|
作者：
CREE, AM [1 ]
FAULKNER, RG [1 ]
LYNE, AT [1 ]
机构：
[1] UNIV LOUGHBOROUGH,INST POLYMER TECHNOL & MAT ENGN,LOUGHBOROUGH,LEICS,ENGLAND
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 1995年 / 11卷 / 06期
关键词：
D O I：
10.1179/mst.1995.11.6.566
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A of the spheroidisation process was carried out on bearing steel SAE 52100 utilising two different heat treatment cycles. For transformation temperatures of 700 and 740 degrees C a cubic power law dependence of the Lifshitz-Wagner-Greenwood type was found to apply to the coarsening of cementite particles in both an austenitic and a ferritic matrix. The rate of coarsening was highest above the critical A(1) temperature. The process was found to be diffusion controlled and values for the operative diffusion coefficients were determined both above and below the critical temperature. The spheroidisation process was found to involve only the precipitation and coarsening of carbide after austenitising, with retained carbide particles serving as nuclei for the reprecipitation process.
引用
收藏
页码：566 / 571
页数：6
相关论文
共 50 条
  • [31] Development of ultrafine bainite plus martensite duplex microstructure in SAE 52100 bearing steel by prior cold deformation
    Chakraborty, J.
    Bhattacharjee, D.
    Manna, I.
    SCRIPTA MATERIALIA, 2009, 61 (06) : 604 - 607
  • [32] EFFECTS OF HOT-ROLLING AND COOLING CONDITIONS ON SPHEROIDIZATION OF CEMENTITE IN A 1-PERCENT-C-CR BEARING STEEL
    SUZUKI, S
    MATSUMOTO, K
    TAGAWA, H
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1988, 28 (03) : B105 - B105
  • [33] Formation of white etching areas in SAE 52100 bearing steel under rolling contact fatigue - Influence of diffusible hydrogen
    Oezel, M.
    Schwedt, A.
    Janitzky, T.
    Kelley, R.
    Bouchet-Marquis, C.
    Pullan, L.
    Broeckmann, C.
    Mayer, J.
    WEAR, 2018, 414 : 352 - 365
  • [34] Homology analysis of prior austenite grain size of SAE52100 bearing steel processed by cyclic heat treatment
    Nakane, Kazuaki
    Kida, Katsuyuki
    Mizobe, Koshiro
    METALLURGY TECHNOLOGY AND MATERIALS II, 2013, 813 : 116 - +
  • [35] Simulation of coarsening of inter-lath cementite in a Q&T steel during tempering
    Ju, Yulin
    Davis, Claire
    Strangwood, Martin
    MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (13) : 1440 - 1456
  • [36] Fatigue crack initiation from small defects under low stress ratios in SAE52100 bearing steel
    Hino, Y.
    Matsunaga, H.
    FOURTH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2010, 7522
  • [37] Mechanical Behavior and Microstructure Evolution of Bearing Steel 52100 During Warm Compression
    Huo, Yuanming
    He, Tao
    Chen, Shoushuang
    Wu, Riming
    JOM, 2018, 70 (07) : 1112 - 1117
  • [38] In-situ synchrotron X-ray diffraction during quenching and tempering of SAE 52100 steel
    Foster, D.
    Paladugu, M.
    Hughes, J.
    Kapousidou, M.
    Islam, U.
    Stark, A.
    Schell, N.
    Jimenez-Melero, E.
    MATERIALS TODAY COMMUNICATIONS, 2021, 29
  • [39] Mechanical Behavior and Microstructure Evolution of Bearing Steel 52100 During Warm Compression
    Yuanming Huo
    Tao He
    Shoushuang Chen
    Riming Wu
    JOM, 2018, 70 : 1112 - 1117
  • [40] Application of optimized lubri-cooling technique in through-feed centerless grinding process of bearing steel SAE 52100
    Luiz Maurício Gonçalves Neto
    Rafael Lemes Rodriguez
    José Claudio Lopes
    Fernando Sabino Fonteque Ribeiro
    Grzegorz M. Królczyk
    Luiz Eduardo de Ângelo Sanchez
    Hamilton José de Mello
    Eduardo Carlos Bianchi
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 515 - 526
12345