The Heat Transfer and Pressure Drop Characteristics of the Finned Tube Banks in Forced Convection (Effects of Fin Height on Heat Transfer Characteristics)

被引：13

作者：

Kawaguchi, Kiyoshi ^{[1
]}

Okui, Kenichi ^{[1
]}

Asai, Toshihiro ^{[2
]}

Hasegawa, Yutaka ^{[3
]}

机构：

[1] Univ Toyama, Fac Engn, Toyama, Japan

[2] Univ Toyama, Grad Sch Sci & Engn, Toyama, Japan

[3] Nagoya Univ, EcoTopia Sci Inst, Nagoya, Aichi, Japan

来源：

HEAT TRANSFER-ASIAN RESEARCH | 2006年 / 35卷 / 03期

关键词：

heat exchanger; heat transfer; spiral fin; serrated fin; fin height;

D O I：

10.1002/htj.20111

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In recent years the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. For example, in the power generation field, as thermal power generation occupies 60% of the power generation demand, considerable improvement of thermal efficiency is required. This paper describes the heat transfer characteristics of finned tube banks used for the heat exchanger in thermal power generation that were clarified by testing serrated finned tube banks with different fin heights for improved higher heat transfer and conventional spiral finned tube banks with different fin height. Then an equation to predict the heat transfer coefficient which is necessary for the design of the heat exchanger was proposed. (C) 2006 Wiley Periodicals, Inc.

引用

页码：194 / 208

页数：15

共 50 条

[41] Heat and mass transfer characteristics for finned tube heat exchangers with humidification
Pirompugd, Worachest
Wang, Chi-Chuan
Wongwises, Somchai
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2007, 21 (02) : 361 - 371
[42] The effect of fin height on forced convection heat transfer from rectangular fin array
Aldoori W.H.
Materials Today: Proceedings, 2023, 80 : 3181 - 3188
[43] Effects of biofouling on airside heat transfer and pressure drop for fin-and-tube heat exchanger
Pu, Hui
Ding, Guo-Liang
Ma, Xiao-Kui
Gao, Yi-Feng
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2008, 42 (03): : 404 - 408
[44] HEAT-TRANSFER AND PRESSURE-DROP CHARACTERISTICS OF FLAT TUBE AND LOUVERED PLATE FIN SURFACES
ACHAICHIA, A
COWELL, TA
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1988, 1 (02) : 147 - 157
[45] Effects of biofouling on air-side heat transfer and pressure drop for finned tube heat exchangers
Pu, Hui
Ding, Guo-liang
Ma, Xiao-kui
Hu, Hai-tao
Gao, Yi-feng
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2009, 32 (05): : 1032 - 1040
[46] HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN TURBULENT FLOW THROUGH A TUBE
Bhuiya, M. M. K.
Ahamed, J. U.
Sarkar, M. A. R.
Salam, B.
Masjuki, H. H.
Kalam, M. A.
Saidur, R.
Sayem, A. S. M.
EXPERIMENTAL HEAT TRANSFER, 2012, 25 (04) : 301 - 322
[47] Study on Heat Transfer and Pressure Drop Characteristics in Fin Micro Channels of Hybrid Heat Exchangers
Wang, Jiawei
Lu, Mingjian
Yan, Xinping
Wang, Jian
Sun, Yuwei
2019 5TH INTERNATIONAL CONFERENCE ON TRANSPORTATION INFORMATION AND SAFETY (ICTIS 2019), 2019, : 431 - 436
[48] AIR-SIDE HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF PERIPHERAL FIN HEAT EXCHANGERS
Pussoli, Bruno F.
Barbosa, Jader R., Jr.
da Silva, Luciana W.
Kaviany, Massoud
PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 4: HEAT TRANSFER MEASUREMENT TECHNIQUES, HEAT TRANSFER EQUIPMENT, THERMOELECTRICS, 2010, : 703 - 712
[49] Numerical investigation of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger
Dogan, Bahadir
Ozturk, M. Mete
Erbay, L. Berrin
JOURNAL OF THERMAL ENGINEERING, 2021, 7 (06): : 1417 - 1431
[50] Heat Transfer and Friction Characteristics of Perforated Fin with a Longitudinal Slot under Forced Convection
Rawat, Kuldeep
Patil, Anil K.
HEAT TRANSFER-ASIAN RESEARCH, 2016, 45 (06): : 536 - 555

← 1 2 3 4 5 →