EFFECT OF HOMOGENIZATION AND PRECIPITATION TREATMENTS ON THE HOT WORKABILITY OF AN ALUMINUM ALLOY-AA2024

被引：54
|
作者：
WOUTERS, P
VERLINDEN, B
MCQUEEN, HJ
AERNOUDT, E
DELAEY, L
CAUWENBERG, S
机构：
[1] CONCORDIA UNIV,DEPT MECH ENGN,MONTREAL H3G 1M8,QUEBEC,CANADA
[2] NV SIDAL,B-2570 DUFFEL,BELGIUM
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1990年 / 123卷 / 02期
关键词：
D O I：
10.1016/0921-5093(90)90289-F
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Hot-torsion tests have been carried out at 310 and 370 °C (at a strain rate of 1 s-1) on an AA2024 aluminium alloy homogenized for 8 h at between 420 and 520 °C and either just water quenched or air cooled and aged at 290 or 350 °C. The flow curves exhibited a large peak stress σp and work softening with low strain εf to fracture in the quenched condition. The peak and work softening were reduced and the ductility improved as either the aging temperature or the deformation temperature was increased. The homogenizing temperature had a large effect on σp but little effect on εf for deformation at 310 °C, whereas at 370 °C there was little effect on σp but a large effect on εf which was much higher. The above effects arise from the relative amounts of solute and dynamic precipitation after various treatments at different test temperatures. © 1990.
引用
收藏
页码：239 / 245
页数：7
相关论文
共 50 条
  • [11] Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082
    Arnoldt, Aurel Ramon
    Schiffl, Andreas
    Hoppel, Heinz Werner
    Oesterreicher, Johannes Albert
    MATERIALS CHARACTERIZATION, 2022, 191
  • [12] Evolution of precipitation during different homogenization treatments in a 3003 aluminum alloy
    Huang, Hsin-Wen
    Ou, Bin-Lung
    MATERIALS & DESIGN, 2009, 30 (07) : 2685 - 2692
  • [13] The effect of homogenization treatment on the hot workability between the surface and the center of AA 2014 ingots
    Totik, Y
    Gavgali, M
    MATERIALS CHARACTERIZATION, 2002, 49 (03) : 261 - 268
  • [14] Effect of initial microstructure on hot workability of 7085 aluminum alloy
    Chen, Song-yi
    Chen, Kang-hua
    Peng, Guo-sheng
    Jia, Le
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (04) : 956 - 963
  • [15] Effects of various homogenisation treatments on the hot workability of ingot aluminium alloy AA2014
    Gavgali, M.
    Aksakal, B.
    Materials Science and Engineering A, 1998, A254 (1-2): : 189 - 199
  • [16] Effects of various homogenisation treatments on the hot workability of ingot aluminium alloy AA2014
    Gavgali, M
    Aksakal, B
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 254 (1-2): : 189 - 199
  • [17] Effect of homogenization on recrystallization and precipitation behavior of 3003 aluminum alloy
    Huang, Hsin-Wen
    Ou, Bin-Lung
    Tsai, Cheng-Ting
    MATERIALS TRANSACTIONS, 2008, 49 (02) : 250 - 259
  • [18] Effect of homogenization treatment on precipitation behavior of 3003 aluminum alloy
    Xiong Z.
    Yan N.
    Zhang Y.
    Yang M.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2022, 53 (11): : 4242 - 4252
  • [19] Solution and precipitation effects on hot workability of 6201 alloy
    McQueen, HJ
    Xia, X
    Cui, Y
    Li, B
    Meng, Q
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 : 420 - 424
  • [20] Effect of precipitation on the warm deformation behavior of AA2024 alloy
    Ebrahimi, G. R.
    Ezatpour, H. R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 681 : 10 - 17
12345