PRODUCTION OF HOT-ROLLED SHEET FOR COLD PRESSING

被引：0

作者：

GALKIN, DP ^{[1
]}

KOCHNEV, MF ^{[1
]}

SARYCHEV, VF ^{[1
]}

IVANCHENKO, VG ^{[1
]}

YARTSEV, KK ^{[1
]}

机构：

[1] IP BARDIN CENT FERROUS MET RES INST,MOSCOW,USSR

来源：

STEEL IN THE USSR | 1979年 / 9卷 / 03期

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A practice has been developed for the production of hot-rolled, aluminium-stabilized, non-aging steels (08 YuA, 10 YuA, 15 YuA, and 20 YuA) 2-7 mm thick for cold pressing. The optimum conditions for finish-rolling were finish-rolling temperature above Ar//3 and coiling range 680-720 degree C. The required chemical composition and mechanical property values for good pressability were also determined. Characteristic features of the microstructure in aluminium-bearing hot-rolled steel and its advantages over that in rimmed steel are discussed.

引用

页码：142 / 144

页数：3

共 50 条

[41] PRODUCTION OF CONTINUOUSLY CAST SLABS AND PROPERTIES OF SHEET HOT AND COLD-ROLLED THEREFROM
BAUER, G
STAHL UND EISEN, 1978, 98 (06): : 235 - 243
[42] High-strength Cold Working Steels (Hot Rolled Strip and Cold Rolled Sheet).
Giedenbacher, G.
Papp, G.
Ponschab, H.F.
Berg- und Huettenmaennische Monatshefte, 1981, 126 (11): : 479 - 483
[43] Production of super high-strength hot-rolled wide strip steel grades for cold forming and cold rolling
Friedrich, KE
Stich, G
Thiemann, G
STAHL UND EISEN, 1999, 119 (08): : 91 - +
[44] EFFECT OF THE PRODUCTION CONDITIONS OF HOT-ROLLED AND COLD-ROLLED STRIP ON THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF DUAL PHASE STEELS
MAID, O
DAHL, W
STRASSBURGER, C
MUSCHENBORN, W
STAHL UND EISEN, 1988, 108 (08): : 365 - 370
[45] EFFECT OF COLD REDUCTION ON STRUCTURE AND MECHANICAL PROPERTIES OF HOT-ROLLED STRIP
POLUKHIN, VP
POTEMKIN, VK
STEEL IN THE USSR, 1971, 1 (08): : 644 - &
[46] TINNING OF STEEL - NEW DEVICE FOR SURFACE INSPECTION OF HOT-ROLLED AND COLD-ROLLED STRIP
SIEWERT, J
STAHL UND EISEN, 1974, 94 (05): : 193 - 198
[47] PRODUCTION OF HOT-ROLLED TUBES OF PERMALLOY 79NM
PLYATSKOVSKII, OA
STATNIKOV, VM
BOGDANOVA, TM
POROKHOVNIKOV, YZ
DOBROGORSKAYA, GA
METALLURGIST, 1982, 26 (5-6) : 176 - 178
[48] SELECTION OF OPTIMUM TECHNOLOGICAL SCHEMES FOR PRODUCTION OF HOT-ROLLED TUBES
VAINZOF, AM
FRIDMAN, VM
SEKHAN, OM
KASYAN, VK
KAGARLIT.AS
STEEL IN THE USSR, 1973, 3 (07): : 593 - 594
[49] PERFORMANCE OF HOT-ROLLED GEARS
BELKORET.NL
RUSSIAN ENGINEERING JOURNAL, 1973, 53 (01): : 5 - 7
[50] Application of Barkhausen method to determine internal stresses in cold-rolled and hot-rolled sheets
Lukowicz, A.
Kowalski, D.
RECENT PROGRESS IN STEEL AND COMPOSITE STRUCTURES, 2016, : 345 - 351

← 1 2 3 4 5 →