A New Approach for Assessing the Moisture Content in SF6-Insulated Equipment

被引：0

作者：

Lessard, M-C. ^{[1
]}

Larocque, G. ^{[1
]}

Gendron, S. ^{[1
]}

Laberge, S. ^{[2
]}

Lavoie, Y. ^{[2
]}

机构：

[1] Hydro Quebec, Inst Rech Hydro Quebec, IREQ, Varennes, PQ, Canada

[2] Hydro Quebec, TransEnergie, Montreal, PQ, Canada

来源：

2016 IEEE ELECTRICAL INSULATION CONFERENCE (EIC) | 2016年

关键词：

SF6-insulated equipment; moisture content; relative humidity; dew point; dielectric strength;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The moisture assessment of SF6-insulated equipment was never a real concern at Hydro-Quebec. In fact, the molecular sieve installed in the equipment was expected to provide an absolute guarantee of the appropriate moisture level. Since then, major failures caused by high moisture content have changed Hydro-Quebec's approach regarding moisture and revealed the importance of its assessment in such equipment. However, from a practical standpoint, there have been problems in accurately assessing the moisture content and then being able to meet the acceptance criteria specified by the manufacturers or by the standards. To prevent new failures associated with high moisture content in SF6-insulated equipment, Hydro-Quebec has developed a new approach based on relative humidity measurement. The present paper explains this technical approach, which is supported by outdoor field experiments.

引用

页码：539 / 542

页数：4

共 50 条

[31] HIGH-VOLTAGE SF6-INSULATED SWITCHGEAR - GAS MONITORING, MAINTENANCE AND SERVICING
MEIER, A
STOLARZ, W
OTTISCHNIG, R
BROWN BOVERI REVIEW, 1972, 59 (04): : 163 - +
[32] SF6-INSULATED METAL-CLAD SWITCHGEAR FOR VOLTAGES OF 72.5 TO 550 KV
MAUTHE, G
SZENTEVARGA, HP
BROWN BOVERI REVIEW, 1978, 65 (04): : 220 - 230
[33] SWITCHES IN SF6 FOR OUTSIDE USE AND SWITCHES FOR SF6-INSULATED SUBSTATIONS WITH NOMINAL TENSIONS AS HIGH AS 800-KV
LEUPP, P
ELETTROTECNICA, 1984, 71 (02): : 145 - 148
[34] CONTRIBUTION TO THE PROBLEM OF SWITCHING BEHAVIOR OF ISOLATORS IN SF6-INSULATED METAL-ENCLOSED SWITCHGEAR
KONIG, D
FELLMANN, KH
ETZ ARCHIV, 1980, 2 (05): : 161 - 163
[35] Insulation Behavior of SF6-Insulated Coaxial Cylinder Arrangements during Impulse Load.
Boeck, Wolfram
Taschner, Werner
Elektrotechnische Zeitschrift Ausgabe A, 1976, 99 (06): : 335 - 340
[36] OSCILLATING SWITCHING IMPULSE VOLTAGE FOR HIGH-VOLTAGE TESTS ON SF6-INSULATED SYSTEMS
CRUCIUS, M
DIESSNER, A
LUXA, G
ELEKTROTECHNISCHE ZEITSCHRIFT ETZ-A, 1977, 98 (02): : 132 - 136
[37] Three-Pole, Sheet-Steel Enclosed, SF6-Insulated Switchgear.
Petry, Hans
Elektrizitatswirtschaft, 1979, 78 (25): : 1025 - 1032
[38] PD characteristics of metallic protrusions in SF6-insulated coaxial electrode arrangements at DC stress
Arnold, P.
Tenbohlen, S.
Riechert, U.
2016 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (IEEE CEIDP), 2016, : 199 - 202
[39] ELECTROSTATIC-FIELD OPTIMIZATION OF THE PROFILE OF EPOXY SPACERS FOR COMPRESSED SF6-INSULATED CABLES
TRINH, NG
RIZK, FAM
VINCENT, C
IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, 1980, 99 (06): : 2164 - 2174
[40] Electrical Faults and Damage Progression in SF6-Insulated Medium Voltage Power Switches.
Dirks, Rolf
Elektrizitatswirtschaft, 1986, 85 (07): : 280 - 284

← 1 2 3 4 5 →